Sign in   |  Join   |  Help

Search

  • Re: Beomaster 901 Mexico

    thank you for the answers, yes I changed with similar components, and yes diodes and 3 big and one small transistor got damaged. I have been thinking about this change for a while, and as didn't find out why, I just wanted to know, still learning
    Posted to The Workbench (Forum) by Søren Mexico on Tue, Apr 17 2012
  • Beomaster 901 Mexico

    A question to my BM 901 type 2602, I downloaded the manual and schematics(two different downloads) from the site, when I started repairing I went with the big manual and the schematics in it, As I made a short during last adjustment I had to go in deeper to find out what I had destroyed. I found differences, between my 901 and the manuals schematics, in some resistors, when I started checking for failures I went through left channel end, checking all components on board and found two resistors that
    Posted to The Workbench (Forum) by Søren Mexico on Tue, Apr 17 2012
  • Re: A Beovox MS150 Project

    [quote user="sonavor"]That inductor is firmly in place though and appears to have original glue[/quote] The inductors on my 3707 was glued with a glue a lot darker than yours, 2 coils was loose from transport, I didn't use tacky glue, but silicone and let dry over night.
    Posted to The Workbench (Forum) by Søren Mexico on Mon, Apr 16 2012
  • Re: What's playing RIGHT NOW?

    [quote user="Evan"] So what's playing... Here we are at the end of a Sinatra 45 and I'm absolutely loving it! [/quote] By Wednesday, you should be able to spreed some purple smoke or say Hi to Joe. , I want a deck like that, its just looking so nice
    Posted to Music & Film (Forum) by Søren Mexico on Mon, Apr 16 2012
  • Re: What Are You Working On Now

    [quote user="eugene1960"]purchased because ... "one must complete the set".[/quote] As you stopped smoking, its already paid for, and fresh food for the BeoVirus. You are waking my Virus, I have some sets to complete, BTW my cheapest buy ever was a BM 901, USD 20.00
    Posted to The Workbench (Forum) by Søren Mexico on Sun, Apr 15 2012
  • Re: It was only a matter of time.

    It had to be something that has been played for sure, before, on this type TT, It had to be music that Evan for sure will listen to, it had to be something that fits the year of production of this TT, It had to be something that I listened to during these years and are listening to today. After a lot of listening and selections, it came to a final between The Rolling Stones, Exile On Main Street and Jimi Hendrix, Are You Experienced. It came down to this one, after Purple Haze toned out. On the way
    Posted to BeoGram (Forum) by Søren Mexico on Sun, Apr 15 2012
  • Re: Made in denmark ?

    [quote user="Shkevin"] Does anyone have a list of which b&o products are still made in denmark? Just purchased earset 3i and i am dissapointed to find that it was made in china. [/quote] Don't be disappointed, I've installed quit a few Machines in China and prefer working together with Chinese, over European and north American, very good workers, intelligent and good educated, if a Chinese product comes out cheap or bad, its because of the designer or the one who ordered it
    Posted to General Discussion & Questions (Forum) by Søren Mexico on Sat, Apr 14 2012
  • Re: A Beovox MS150 Project

    About the voice coil, I would try to repair it with thin paper (bible paper) on both sides with epoxy, then find a plastic tube that fits inside, to get it nice and circular again, eventually you will have to sand down the epoxy to get it thin enough. The center pole, is it possible to epoxy it all around at the arrow, I cant see what material you have at bottom, but if you epoxy it make sure it is centered. Then get a new spider, cut the outer D to fit, then, with a circle, mark and cut the center
    Posted to The Workbench (Forum) by Søren Mexico on Fri, Apr 13 2012
  • Re: Cleaning an MMC20CL stylus on a Beogram 4002...

    A USD 0.02 SMMC4 cleaner 1. Buy Original Magic Eraser pad, cut to size, use the rest for cleaning aluminum, plastic, inox and what so ever. 2. Insert a clean unused tooth pick end, 5 Mm. into the flat end of the ME piece. 3. Just dip the pickup needle into the professional pickup cleaner a couple of times, if very dirty scrape carefully with the pointed edge of the professional pick up cleaner. 3. Result, the pics taken before cleaning came out bad, but there is a difference to be seen, I'm not
    Posted to General Discussion & Questions (Forum) by Søren Mexico on Thu, Apr 12 2012
  • Re: A Beovox MS150 Project

    [quote user="sonavor"]I am going to clean up all four MS150 woofers before refoaming any of them. I like getting all of the dirty work out of the way so I can get one step completely out of the way before going on to the next.[/quote] I like that, nice and clean, now glue the foam to the cone, before you cut the dust cap, and start shimming.
    Posted to The Workbench (Forum) by Søren Mexico on Sun, Apr 8 2012
Page 5 of 446 (4460 items) « First ... < Previous 3 4 5 6 7 Next > ... Last » | More Search Options
Beoworld Security Certificate

SSL