Sign in   |  Join   |  Help

Search

  • Re: Use speakers connected to BeoVision Avant for Beosound 3200 playback

    The BV11 responds to the CD instruction if it's set in option 2. So, volume should then also be controlled. Just connect the AUX from the BS3200 to the BV11 analog inputs. Should work. A friend has the same setup with a BC2.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Mon, Sep 9 2019
  • Re: Beosound 2300/3000 keyboards removal…

    Replacement of the keyboard is done by removing/cutting the plastic parts which holds the metal bracket. After replacement of the foil or buttons, the metal bracket will be hold in place with smal screw with washers, which comes with the replacement kit.
    Posted to The Workbench (Forum) by Beobuddy on Sun, Sep 8 2019
  • Re: New BeoSound Stage!

    I've read the article MM mentioned, but it causes some confusion. WhatHiFi states that for using Dolby Atmos or TrueHD you need an eARC hdmi connection on your panel. For virtual height sound production. Only newer panels will have that eARC (Enhanced Audio Return Channel) connection with the newer hdmi 2.1 specifications. B&O doesn't mention that the Stage needs an eARC connection on their site, just ARC. So, is it capable to reproduce some kind of virtual height sound which is done
    Posted to General Discussion & Questions (Forum) by Beobuddy on Fri, Sep 6 2019
  • Re: Beosound 9000 mk3 problem

    TM71 and TM 73 are meant to be used after service. It’s never a cause. TS has a BS9000 which needs cleaning of the sensor next to the sledgemotor. The BS9000 is placed vertical and dust causes loss of pulses at the sensor. The system get’s confused and stalls. In the meantime power has been *** off and the sledge drops to the bottom. The sensor needs to he cleaned but a huge warning: it’s very, very sensitive for static energy and alcohol doesn’t help either.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Tue, Sep 3 2019
  • Re: Beovision 7-55 and Kodi: need support for audio setting

    I've had over the past years several RPI's from version 1 to the latest 3B (now there the version 4, I know). I've tried several images, some specially designed for playing media. But with the Opensource software, you will always end with one or other (audio)format, which your set can't handle. Passthrough should be the correct setting, but then it depends on the telly if it can decode the source/movie. I liked the Max2Play software the nicest. You can control your Pi from a distance
    Posted to General Discussion & Questions (Forum) by Beobuddy on Mon, Sep 2 2019
  • Re: Beolab 50

    The front grill shows an amazing skill of craftsmanship . Simply wonderful done. But I really don’t like that you can see the drivers. Some cloth behind the grill would be (for me) the solution. I’ve seen the production of several aluminium parts at the factory last august, but that is intriguing. So much care for details you normally don’t know or are aware off.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Sat, Aug 31 2019
  • Re: Beogram CDX CDX2 CD 3300 gear for lid broken

    I can supply the part. PM me for information.
    Posted to The Workbench (Forum) by Beobuddy on Fri, Aug 30 2019
  • Re: CD Hub for Beocenter 9000

    Or here: https://forum.beoworld.org/forums/t/36022.aspx?PageIndex=2 Pm me if you need one.
    Posted to The Workbench (Forum) by Beobuddy on Fri, Aug 30 2019
  • Re: Besound 1 (old) without pincode

    I've had BS1's for reapir and can confirm that there are versions with pincode. This is an option whether it's set or not. The original manual mentions nothing about a pincode, so you can assume that the first are without pincode. When pincode is activated the "PIN" appears behind the alu grill.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Thu, Aug 29 2019
  • Re: BeoLab 8000: how does AutoStart work with Cinch audio-IN ?

    Answer: 1. Send audiosignal to both P4.1 and P4.2. P4.3 is ground 2. Brown wire carries the same signal as send over P4.1 to detect audio. Switching on/off is done on main PCB.When brown wire shortned to ground the autostart is then disabled. With the above suggestion, keep the switch at the bottom on Line. Otherwise audio will be muted when it's set on Left or Right. Question:. 1. Why don't you become a silver or gold member? In that case you can download the servicemanual with it's
    Posted to General Discussion & Questions (Forum) by Beobuddy on Thu, Aug 29 2019
Page 4 of 204 (2032 items) « First ... < Previous 2 3 4 5 6 Next > ... Last » | More Search Options
Beoworld Security Certificate

SSL