Sign in   |  Join   |  Help

Search

  • Re: Essence mk2 - link eye and/or essence remote

    I’ve had the issues. 1. The Essence ha to be set in L-opt 1, if I remember correct. It’d an option setting. 2. Had the same with 1 of my remotes. Send it for repair as it turned out broken.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Thu, May 28 2020
  • Re: Beovision 7 40 mk 3. Sound bar and stand

    Does the DVD tray open when you touch the button when the BV7 is in standby? The BV7 mk3 doesn't have a eeprom you can order. Settings are stored and software is flashed. The mk1 and 2 has an eeprom you could order.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Thu, May 28 2020
  • Re: Beosystem 3 + Beovision 5

    The Beosystem 3 works well on pretty any computermonitor. The Beovision 5 plasma monitor accept only RGB signals without VESA and doesn't accept hd signals, like 720P. The BS3 is always used with at least DVI, which has digital information and analog VGA (differ on version DVI). So, the first question still remains, when the Beosystem 3 starts up, do you have a picture on the Beovision 5 plasma? Then normally, advanced communication via the serial cable for active setting (brightness, colour
    Posted to General Discussion & Questions (Forum) by Beobuddy on Tue, May 26 2020
  • Re: Beosound 5 connecting to Beosound 9000 Mk2

    The BS9000 has at least software version 2.0. It needs 2.21A for Nmusic features.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Mon, May 25 2020
  • Re: Beosystem 3 + Beovision 5

    Do you have any picture on your BV5 plasma from the BS3?
    Posted to General Discussion & Questions (Forum) by Beobuddy on Mon, May 25 2020
  • Re: Beolab 8000 - 5 minute makeover....

    With all respect for Steve, but some advice for the ones who want to take off their frets, do not open the top part as Steve shows. The plastic clips on top, which holds the top part of the fret in place, will break or bend so much, which will result in a top part that will not be closed again. The official way is to release the clips at both sides from bottom to top and then slide the complete frame approximately 20-25 cm , or all the way, upwards.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Sat, May 23 2020
  • Re: Avant 32 Mk III - changing DVD Chassis/controller - advice please?

    Swapping both drive and controller will be sufficient. There has been 2 different drives. A Panasonic and a Pioneer version afaik.
    Posted to General Discussion & Questions (Forum) by Beobuddy on Sat, May 16 2020
  • Re: Beolab 5 reliability?

    [quote user="oli"] There is nothing more nothing less issue regarding reliability than any other speaker with a lot of electronic embedded. Don't forget that it is the first B&O speaker to have so much digital stuff built in. Reliability is of course depending of the stability of the electric network, like for all electronic devices, like with a computer for example. I am pretty sure that BL50 and BL90 will have exactly the same "reliability" issue in comparaison to more
    Posted to General Discussion & Questions (Forum) by Beobuddy on Sat, May 16 2020
  • Re: Beolab 5 reliability?

    When your BL5 needs to be repaired, a swap of chassis is always done when it comes to the electronics. You can't order separate parts from the chassis. That has a downside and upside, The costs can be significant, but then you are pretty confident that all the electronics are ready to go for the next years. I think it's relative, when you bought them new for the retail price then the costs for those are easier to handle then when you bought them second life and have to pay for the same amount
    Posted to General Discussion & Questions (Forum) by Beobuddy on Fri, May 15 2020
  • New LG CX Oled has PUC control?

    I've looked through the specifications from the new LG Oled CX version on their site and saw that they mentioned explicitly the settopbox control through an ir-blaster. I can't find this feature in the C9 specifications. Has LG adopted B&O's PUC control? So, does that mean that when you buy a new LG CX with B&O's Stage and Beoremote 1BT, you can control the setup with extra settopboxes with just only the BR1BT?
    Posted to General Discussion & Questions (Forum) by Beobuddy on Fri, May 15 2020
Page 3 of 217 (2169 items) < Previous 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL