Sign in   |  Join   |  Help

Search

  • Re: Beocenter 9000 pre out to Beocenter 2

    Thanks for the Info Guy. I managed to test this using the pre out on the BC9000, this went to an RCA switch then to the BC2, this worked fine although as you said, I did get the double volume. I presume I will have to set the A.OPT to 0 on the BC9000 (not sure how to do this but will try and figure it out) The sound quality was not that great though when connected and testing, I think this may be due to using cheap RCA cables, I do have some high quality Ixos cables so will test these when I get
    Posted to General Discussion & Questions (Forum) by gadmin on Wed, Aug 21 2019
  • Re: Beocenter 9000 pre out to Beocenter 2

    Thanks for the reply Guy, I presume when you say use the BC9000 line out that this is the Pre out ? I will test this but I think having as you said double volume may get annoying especially when using the remote as both system will be in the same room. I think the better option will be to use the AUX or Tape 2 on the BC9000 to the Aux in on the BC2., would I need the 5 pin DIN to 4 RCA or just 5 pin DIN to two RCA ? as the BC2 only has one AUX input with two RCA connections. Thanks
    Posted to General Discussion & Questions (Forum) by gadmin on Tue, Aug 13 2019
  • Beocenter 9000 pre out to Beocenter 2

    Hi all, My current system is a Becenter 2 with Beolab 3 speakers, I also have a Beocenter 9000 with Beogram 3300. I was wondering if I could link the Beocenter 9000 via the pre amp out to the line in on the Beocenter 2, mainly so I can play vinyl and the odd cassette through the Beocenter 2 AUX input. Thanks
    Posted to General Discussion & Questions (Forum) by gadmin on Sun, Aug 11 2019
  • Re: Help With Playmaker

    Hi thank you for the link, yes connected it to the router via CAT5E, also tried as as per the instructions to connect directly to a laptop. This enable wireless set up via cable. There is no lights on the PM at all apart from the few when first switched on at the mains. I presume the PM should respond when pressing the power button / wireless set up button or the hard reset. But It is not responding at all, with no light indicators
    Posted to General Discussion & Questions (Forum) by gadmin on Sat, Jun 29 2019
  • Re: Help With Playmaker

    Thanks for the reply, So far I have tried - Connecting the Playmaker directly to the laptop via network cable and entering the IP address, no response no connection to webpage Hard reset - unit does nothing, no lights flash, nothing I have as you suggested connected the speakers and connected a CD player through the line in, still nothing. Tried connecting via Airplay, phone does not find the Playmaker. Tried using Beo 4, nothing happening on the Playmaker. All I get from the unit, is when it is
    Posted to General Discussion & Questions (Forum) by gadmin on Sat, Jun 29 2019
  • Help With Playmaker

    Hi all, I have just acquired a second hand (but apparently unused) Playmaker MK2, this will be connecting to my Beocenter 2 and Beolab 3's. I've just got round to testing this, I plugged in the network cable and power lead (no speakers attached) and all I seam to get is a white light at the bottom next to the power on/off that flashes 5 times then the mute button flashes red once then nothing.I have tried the hard reset by holding the reset button for 5+ seconds and also plugging it directly
    Posted to General Discussion & Questions (Forum) by gadmin on Sat, Jun 29 2019
  • Re: Beocenter 2200 Cassette Belts

    Thanks Ron have sent Dillon a message. Gary
    Posted to General Discussion & Questions (Forum) by gadmin on Wed, Jan 30 2019
  • Re: Beocenter 2200 stripdown help

    Hi, if your any good at following service diagrams you can download the manual here: http://www.fredric.co.uk/blog/132-Bang-&-Olufsen-Beocenter-2200-Service-Manual I am in the process of stripping mine down to replace the tape belts.
    Posted to General Discussion & Questions (Forum) by gadmin on Wed, Jan 30 2019
  • Beocenter 2200 Cassette Belts

    I have a Beocenter 2200 in very good condition but in need of a little TLC. The tape deck just makes a clicking sound when I try to play anything, I am presuming the belts have gone. Does anyone know where to source the belts, I have seen some on Ebay but from reading other post I am guessing they may not be the correct ones with regards to elasticity etc. Thanks
    Posted to General Discussion & Questions (Forum) by gadmin on Tue, Jan 29 2019
  • Beogram 1202 Manual How to use change RPM speeds

    Hi all, I have just purchased a very nice Beogram 1202 which appears to be in very good condition, does anyone know where I can get hold of the manual, I'm pretty sure it's fairly simple to use but I am confused at what the dial around the lift switch does also the dial on the bottom left back. It seems as if this is only playing in 33rpm. How do I change speeds 33rpm to 45rpm ? The below is what happens when moving the dial around the lift swich When I the dial around the lift switch in
    Posted to General Discussion & Questions (Forum) by gadmin on Sat, Jan 12 2019
Page 1 of 3 (25 items) 1 2 3 Next > | More Search Options
Beoworld Security Certificate

SSL