Sign in   |  Join   |  Help

Search

  • Re: Beosound 9000 Mk 3 disc reading problem

    Hi, generally when you have dust the finger protection system stops operations and "cleaning required" message is being displayed. In your case this probably didn't happen. You may took out all CDs and just clean exterior and interior with damp cloth with some window cleaning liquid. The usage of vacuum cleaner carries the risk of electrostatics so is not recommended.
    Posted to General Discussion & Questions (Forum) by Peter on Thu, Apr 11 2019
  • Re: Beosound 9000 Mk 3 disc reading problem

    Amigo, I meant glass lid + aluminium panel + space under disks, all what is possible to be cleaned without dismantling. Generally we're speaking about 2 things: one: removing a dust from BS9000 whereever it is two: cleaning the laser lens from a dirt not just dust. There may be a grease in the air for example which sticks to the lens. Therefore 30% alcohol + a drop of washing liquid. When you run TM 65 as described previously, you may see the lens, otherwise you do it "blind' but may
    Posted to General Discussion & Questions (Forum) by Peter on Thu, Apr 11 2019
  • Re: Beosound 9000 Mk 3 disc reading problem

    Generally on that forum people warn before using a cleaning CD, personally I doubt it would ever run. I was dismantling clamper arm according to service manual in order to get to the lens. Now I see that running TM65 the lens should move far enough that you can just take out cover for CD clamper and lens f/light (9142). You shouldn't clean dry lens so use pure vodka or liquid as described in my previous post. Use q-tip ( ear stick) and then wipe with microfibre. As some liquid may fall into lens
    Posted to General Discussion & Questions (Forum) by Peter on Wed, Apr 3 2019
  • Re: Beosound 9000 Mk 3 disc reading problem

    Hi Amigo, mine BS9000 also sometimes spin in opposite direction but then spins back normal and starts to play. Before cleaning the laser clean the disc or put a disk you're 100% sure is good. Then run TM 71 and 73 and see if it helped. If not you should clean the lens as they should be cleaned from time to time anyway. But TM 71 and 73 are important to know where the problem is.
    Posted to General Discussion & Questions (Forum) by Peter on Tue, Apr 2 2019
  • Re: BeoSound 9000 MKIII CD Scraping Noises On Vertical Floor Stand

    To make your MK III respond to Beo4 you have to connect it in A:OPT 1
    Posted to General Discussion & Questions (Forum) by Peter on Tue, Apr 2 2019
  • Re: Beosound 9000 Mk 3 disc reading problem

    Hi, according to my experience spinning in opposite direction is not an issue, however i am not sure that the disc must not spin there. More problem is with PAUSE - I would try to clean laser lens. Some experts say "with 30% alkohol and one drop of washing liquid". To get to the lens - try run TM 65.
    Posted to General Discussion & Questions (Forum) by Peter on Mon, Apr 1 2019
  • Re: BeoSound 9000 MKIII CD Scraping Noises On Vertical Floor Stand

    ...plus run TM71 and TM73 on vertical stand before playing CDs
    Posted to General Discussion & Questions (Forum) by Peter on Mon, Mar 25 2019
  • Re: BeoSound 9000 Aux Port

    Hi, it works both ways pins 1,4 are out while 3,5 are in, pin 2 is gnd
    Posted to General Discussion & Questions (Forum) by Peter on Tue, Mar 19 2019
  • Re: Beosound 9000 disc pause problem

    Strange because spinning the disc means that disc holders (9009 and 9024) are OK. Please have a look if a disk somehow toutches the holders during spin. Please also compare holders behavior when inserting a disc vs holders in other slots. Have you tried various discs in that slot ? ( such that are playing in other slots). Having above checked please run TM 71 and then TM 73 in slot 5 - you will see if the results are OK.
    Posted to BeoWorld North America (Forum) by Peter on Wed, Mar 13 2019
  • Re: Beosound 9000 Mk1 - First CD will not play

    Being encouraged by Weebyx in running testmodes I have decided to run TM 65 Light pen to outermost position, with no CD inserted. That way you may see the laser lens. During that mode you can open the lid and then take out power plug from mains. Afterwards you may remove the glass lid, remove cover for CD clamper, top plate for CD mechanism and lens f light (9142). So you will access to clean laser lens without the need of clamper arm dismantling.
    Posted to The Workbench (Forum) by Peter on Sat, Feb 23 2019
Page 1 of 7 (66 items) 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL