Sign in   |  Join   |  Help

Search

  • An old BeoCenter 6 floor stand gets a new life

    A couple of months back i bought a BeoCenter 6-23. Not because I needed it, but simply because it was cheap. I thought it would be a nice bedroom TV. But at the same time that I had bought the BC6 I found an even cheaper BeoVision 8-26. I preferred the look of the BC6-23 but although it had a DVI-socket, it wasn't HDCP-compatible. So if i wanted to connect my AppleTV I had to use a scart-converter. The BV8-26 had a single HDMI-socket, not much, but perfect for my needs. So i thought to myself
    Posted to The Workbench (Forum) by 8000Kristian on Wed, Jul 6 2016
  • Re: BeoVision 4-50 Table Stand

    [quote user="kallasr"] http://www.eurodocument.com/img/data/PANA_S9_UK.pdf You can install a (second) DVI board as well to have a second HD input (did this with my Beovision 4-42).... [/quote] Thank you Ralf! That was extremely helpful. After a bit of searching i found out that the stands were quite expensive, and i'm getting closer to making a stand myself.
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Sat, Jul 2 2016
  • Re: BeoVision 4-50 Table Stand

    [quote user="BEOVOX141"] The BV4-50 comes in at a whopping 50kg! Which made me think,- Why not take the base from an old Avant. The center of gravity should be about the same, and the MDF chassis is not only rock solid, but also very easy to modify! The motor assembly is no more than 2 inches high, and would look great as a tabel stand! I have made several stands from recyled Beovison parts, AV9000 , BV7-32 and the Avant If you need parts let me know :-) [/quote] I'm thinking about
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Fri, Jul 1 2016
  • Re: BeoVision 4-50 Table Stand

    [quote user="kallasr"] Try to find out what Panasonic pedestal will fit. It is a Panasonic Professional display under the B&O frame.... Did so with my Beovision 4-42 (bought a defect Panasonic display with base just to get the stand ). [/quote] After some searching i found out that the Plasma panel in my BV4 is a D9, how do i find out which Panasonic displays used the D9 panel?
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Fri, Jul 1 2016
  • BeoVision 4-50 Table Stand

    Last week i did a complete bargain on a wallmounted BeoVision 4-50. But i don't want to mount it on a wall. I have an old B&O F1000 furniture i want to put it on. And here is my question.. Do anybody here on BeoWorld have a used Table Stand for the BeoVision 4? The two dealers in my town couldn't sell me one. So i should either find a used one, or make one myself. As i'm living in Denmark, and they are extremely hard to find here, i've prepared myself to make one on my own. If
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Thu, Jun 30 2016
    Filed under: beovision 4-50, Table Stand
  • Re: No sound from front speakers connected to BeoSystem 3

    PROBLEM SOLVED... As i woke up i was ready to grab the BeoSystem and bring it to my local dealer, for him to find the fault. But something in my head told me give the BeoSystem a reset and start over. So i did, and i found out that the fault was... Me... I didn't assign the speakers as i should have done. So this time it worked and the system have been playing perfectly since that. :-) A big thanks goes out to all of you who have responded to the thread!
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Thu, Jun 30 2016
  • Re: No sound from front speakers connected to BeoSystem 3

    Hi Elephant I have tried to adjust the volume individually for each speaker, but it doesn't make any difference :-/.
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Tue, Jun 28 2016
  • No sound from front speakers connected to BeoSystem 3

    Hi BeoWorld members. I'm quite new on the forum. So please excuse me if i posted this in the wrong category. A couple of months ago i bought a couple of Beolab 8000 used from a B&O dealership in the town i'm living in. As i had just sold my old BeoMaster 7000 a few months prior to that, i used the Line-In connection on the speakers to connect them to my TV. Last week i found a good deal on a BeoVision 4-50 including a BeoSystem 3, in my hometown. So when my dad invited me over for his
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Tue, Jun 28 2016
    Filed under: Beolab 4, Beosystem 3, Beolab 8000, Beo 4, beovision 4-50
  • Re: No sound from front speakers connected to BeoSystem 3

    Thanks for your reply! Although i know it would have been weird i had to try if there was something wrong with the 8000s. So i tried to move their POWERLINK connector to the CENTRE port of the BeoSystem 3. That worked and i'm now sure, that every speaker works. So my conclusion is that i'm the failure or there is a fault in the speakerconnections of the BeoSystem 3. I hope that i'm doing something wrong when assigning the speakers. 😕
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Tue, Jun 28 2016
  • Re: No sound from front speakers connected to BeoSystem 3

    Hi Steve. That's an extremely kind offer, but i have tested each cable through the POWERLINK-port of my BV8-26, and they did what they should. It would have been nice if it was as easy as switching cables..
    Posted to General Discussion & Questions (Forum) by 8000Kristian on Tue, Jun 28 2016
Page 3 of 3 (30 items) < Previous 1 2 3 | More Search Options
Beoworld Security Certificate

SSL