Sign in   |  Join   |  Help

Search

  • Re: YouTube video with John at B&O Manchester - any questions?

    I also wanted to mention that B&O Masterlink RJ45 distribution boxes have recently been available on the US eBay website.
    Posted to General Discussion & Questions (Forum) by pjk561 on Fri, Mar 1 2019
  • Re: YouTube video with John at B&O Manchester - any questions?

    Hi, I'd like to know about connecting the old IR receivers which had stereo/other plugs to the newer RJ45 IR inputs such as found on the Beosystem 4. My Situation - Years ago I had the AV7000 external IR receiver mounted in the wall and would like to be able to connect it to the Beosystem 4. I'm not concerned about auto contrast in fact the B&O IR receiver I use with the Beosystem 4 doesn't have the auto contrast. Others may have similar situations. Thanks, Pat
    Posted to General Discussion & Questions (Forum) by pjk561 on Fri, Mar 1 2019
  • A.OPT and V.OPT options. What does each option DO?

    What does each of the options do or is for? A.Opt 0 = No IR A.Opt 1 = Main Room MasterLink A.Opt 2 = Main Room MasterLink (How does this differ from A.Opt 1?) A.Opt 3 = ? A.Opt 4 = Main Room 2nd Product (example Please.) Is this for a second audio product. A.Opt 5 = Link Room MasterLink A.Opt 6 = Link Room MasterLink (How does this differ from A.Opt 5?) I assume the V.Opt are for TVs (Video Sources) and would be structured like the A.Opt If you know of article explaining each of the differences and
    Posted to General Discussion & Questions (Forum) by pjk561 on Mon, Jan 28 2019
  • Re: A.OPT and V.OPT options. What does each option DO?

    Thanks to all those who responded. The tech section linked gives some good examples
    Posted to General Discussion & Questions (Forum) by pjk561 on Mon, Jan 28 2019
  • Re: NL/ML Config Help needed.

    I figured out what I needed to do to get the BeoSound 4 talking to the NL/ML converter and onto the Beosystem 4. I didn't need to change any settings in the NL/ML converter. I needed to set the A.Opt to 1 on the BeoSound 4. Once I did that, I downpowered the Beosound 4 and the NL/ML converter. Connected the ML cable between the two and the repowered up the BeoSound 4 and the NL/ML converter. I was then able to get signals from the Beosystem 4 to the Beosound 4.
    Posted to General Discussion & Questions (Forum) by pjk561 on Mon, Jan 28 2019
    Filed under: BeoSound 4, NL/ML Converter
  • Re: NL/ML Config Help needed.

    Here is the wiring config of my system. I recently purchased the BeoSound 4 off of eBay. Please note that the BeoSound 4 doesn't respond to a BEO4 remote. I think the IR sensor has been disabled via the A.Opt command but I haven't tried to enable it. The radio and CD plays fine. I attached a pair of Beolab 3's but I unplugged them at the BeoSound 4 when installing the Masterlink cable to the BeoSound 4. I was hoping I could just swap the Masterlink cable and all would be good with the
    Posted to General Discussion & Questions (Forum) by pjk561 on Thu, Jan 24 2019
  • Re: NL/ML Config Help needed.

    I will try to remove it.
    Posted to General Discussion & Questions (Forum) by pjk561 on Thu, Jan 24 2019
  • Re: NL/ML Config Help needed.

    That entry (all zeros) in the NL/ML configuration has been deleted. But no change in response. Does A.Opt or V.Opt on the BeoSound 4 have any bearing on its operation? What should they be for this system? Thanks
    Posted to General Discussion & Questions (Forum) by pjk561 on Thu, Jan 24 2019
  • Re: WiSA 5.1 recommendation for center channel

    You could also add a Receiver 1 and connect any powered B&O speaker to it. In my setup I use a Beolab 4000 as center and its connected to a Receiver 1.. Along with the Receiver 1 I had to purchase the RJ45 to Powerlink adapter
    Posted to General Discussion & Questions (Forum) by pjk561 on Wed, Jan 23 2019
  • Questions on Masterlink Wiring

    I have a Masterlink RJ45 distribution panel and I was planning to modify my current B&O system. I was planning to go from a Beosound 4 via a masterlink cable which has the standard masterlink plug on one end and a RJ45 plug on the other end to the Masterlink RJ45 distribution panel. I was also planning on going from the Masterlink RJ45 distribution panel to an NL/ML converter. I have found several such cables on line. An example https://www.bollostore.com/masterlink-to-rj45 Are these cables suitable
    Posted to General Discussion & Questions (Forum) by pjk561 on Sat, Jan 5 2019
    Filed under: MasterLink Cable
Page 1 of 7 (70 items) 1 2 3 4 5 Next > ... Last ยป | More Search Options
Beoworld Security Certificate

SSL