Sign in   |  Join   |  Help

Search

  • Re: Beo 6 programming

    In the configuration tool there are several taps like "zones", choose product" and also "edit" In this tap you can test the "buttons" by clicking on in the picture from the Beo6. if you do not click but only move over the double arrow "button" a pop up shows which fuction is programmed for this button. The CT version 6.84 do not allow to program the hard keys (buttons) yourself. Perhaps you should use an older Version, maybe 6.22
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Thu, Nov 24 2016
  • Re: Beo 6 programming

    Fine Does the button for wind and rewind don't work automatically? Hm.... Which configuration tool do you use? With the newest one it is not possible to proram the hardbuttons yourself. You can obly programm the touchscreenbuttons. Did you test in the "edit" tap like I menioned in a post above?
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Tue, Nov 22 2016
  • Re: Beo 6 programming

    Can you try with autoconnect? Autoconnect to a wireless setup > Select Wireless in the Setup menu. > Press Auto on Beo6. > Press the 'connect' button (WPS) on your access point. > Press OK on Beo6. Beo6 connects to the access point, this may take a while. > When connection is established, Connection OK appears in the Beo6 display. Or maybe this is interesting http://forum.beoworld.org/forums/t/9869.aspx
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Mon, Nov 21 2016
  • Re: Beo 6 programming

    It is hard to make a diagosis for far away, but it sounds like a bad display ;-(
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Fri, Nov 18 2016
  • Re: Beo 6 programming

    Nobody is dump...you ask for help and you got it. Thats it. Hm...sounds a litte bit strange. http://forum.beoworld.org/forums/t/14708.aspx Which config tool do you use? I don't know...maybe switch it off..hold the button in the middle for 10 sec or download the config again?? Maybe the Beo6 did an update to a newer version, so the download of the configuration file didn't work correctly?? I don't know...I think you need to try some things on your own. Sorry. I can not help properly ;
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Wed, Nov 16 2016
  • Re: Beo 6 programming

    The Beo5 has no two-way-communication/ wifi. So you don't get covers on Beo5. https://www.bang-olufsen.com/~/mediaV3/Files/User-Guides/BeoSound5/beosound5_userguide_english.pdf Take a look at the manual page 8. To check if you remote is a Beo6 got to the menue. If there is a point for "wireless" it is a beo 6. https://www.bang-olufsen.com/~/mediaV3/Files/User-Guides/Beo6/beo6_userguide_english.pdf Also page 8 ;-) Good luck.
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Tue, Nov 15 2016
  • Re: Beo 6 programming

    Hi in this thread you can see the difference http://archivedforum.beoworld.org/forums/t/36684.aspx . The picture is nearly in the middle. There are only two diffenences between Beo5 and Beo6. The Beo6 has a larger display which reacts instantly when touched and the wifi fuction. The program is not extremy complicatet. You need to go though the index taps in the upper area. It works with drag an drop. I think the program gets the serial automatically!? At the end you need to download it to you Beo5
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Tue, Nov 15 2016
  • Re: Beo 6 programming

    Hi, you can do it on your own with the configuration tool. You can find a link in this thread http://forum.beoworld.org/forums/t/12278.aspx?PageIndex=2 on the last page and post. uweotto
    Posted to The Beo5/6 Remote Forum (Forum) by uweotto on Sat, Nov 5 2016
  • Re: Beo 5 Batterie und Config Tool

    Ob du damit leben kannst, must du selber entscheiden. Wenn man etwas handwerkliches Geschick hat, ist es nicht sooo schwer. Aber das Flachkabel wieder dran zu machen ist bei der Beo5 schon etwas fummelig. Und man benötigt natürlich auch noch das passende Werkzeug. So einen kleinen Schraubendreher hat nicht jeder eben rumliegen. Wenn du nicht so gern bastelst, laß es machen. ;-)
    Posted to Deutsche BeoWorld (Forum) by uweotto on Sat, Nov 5 2016
  • Re: Beo 5 Batterie und Config Tool

    Also ich habe im Mai diesen Jahres den Akku meiner Beo6 getauscht und der kostete 40 Euro. Der Akku war aber auch komplett mit Kabel. Also nur Beo6 aufschrauben und austauschen (siehe Link). Das nervigste ist das Flachkabel. ;-) http://beo5.beoworld.org/Beo5battery.htm Was der Austausch im Geschäft an Geld kostet, kann ich Dir nicht sagen. Zur Funktionalität mit Windows 10 lies Bitte den Thread. http://forum.beoworld.org/forums/t/12278.aspx In der Mitte findest du dazu einen Post von Keith
    Posted to Deutsche BeoWorld (Forum) by uweotto on Mon, Oct 31 2016
Page 1 of 2 (15 items) 1 2 Next > | More Search Options
Beoworld Security Certificate

SSL