Sign in   |  Join   |  Help

Browse Forum Posts by Tags

Showing related tags and posts for the BeoGram forum. See all tags in the site
  • Re: Beogram 5500 won't turn on

    Hi Menahem Just saw your response re. tangential-tracking arm issue on Beogram 5500. In my case, the Play function works, the arm goes up and down and plays the record properly. However, the cartridge does not slide anymore, ultimately leading the reading to stop. I am kind of scared to carry out your...
    Posted to BeoGram (Forum) by pfroche on Thu, Jun 27 2013
    Filed under: tonearm, Beogram 5500, tangential, tangential arm issues, Beogram 5500
  • Beogram 3300 - Arm lowering differently at the beginning and at the end

    Dear Community, Here is the situation on a 1986 Beogram 3300 deck: The arm lowers when I press "play", except that at the beginning of the disc, the diamond doesnt touch the disc (3 mm too high), and at the end of the disc, the cartridge is very close to the disc, the stylus suspension looks...
    Posted to BeoGram (Forum) by GleBufsen on Fri, Mar 21 2014
    Filed under: tonearm, tangential arm issues, Beogram 3000, Beogram 3000 not working, beogram 3300
  • Beogram 5500 String Help

    Hi! I recently acquired a BeoSystem 5500 and am having trouble with the Beogram turntable and the tone arms not moving along the tracking. I've opened her up and everything is in place as it should be (according to manual diagrams and pictures from the internet) except the white string inside has...
    Posted to BeoGram (Forum) by hotmessjessxx on Sun, Oct 8 2017
    Filed under: tonearm, problem, Beogram 5500, tangential, beogram, 5500, tangential arm issues, Beogram 5500, tracking, Beogram 5500 buzz, linear, turntable, record, Repair, Beoram 4000 slider tracking problems, help, Tracking Force, Beogram tonearm, issues, Beogram turntable issue, record player, beogram repair, pulley
  • Beogram 6000 arm doesn't move to the left

    Hi, I am restoring a Beogram 6000 when a new problem showed up. The arm stopped moving to the left. Works perfect when moving right. I tested the Motor drive Board and got the folloing results. The technichal diagram (attached) provides the following values for the motor voltage: Action P5(2) p5(4) >>...
    Posted to BeoGram (Forum) by FX on Wed, Oct 25 2017
    Filed under: tonearm, tangential, motor, tangential arm issues, Beogram 6000 problems, Tracking Force
  • Re: BeoGram 9500 Tone Arm issue

    Hello, adding on to this post as I have the exact same problem, but the issue remains despite refitting of cam wheel 1636 as described above. The tonearm will not return once it hits the run-out groove, it stays at the center of the record like a manual turntable. Hitting the stop button will lift the...
    Posted to BeoGram (Forum) by rpochi on Tue, Jun 16 2020
    Filed under: tonearm, tangential, lift, tangential arm issues, TX2, arm, Beogram tonearm, help needed!, tone arm, troubleshooting
Page 1 of 1 (5 items)
Beoworld Security Certificate

SSL