Sign in   |  Join   |  Help
All Tags » lift (RSS)
Click here to change your Beoworld Account Details

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
  • Beogram 1203 part replacement

    Hello, I am at the moment repairing a beogram 1203 it is in beautiful optical condition and will be moved to the living room once it is 100%. I have already replaced the drive belt but the lift mechanism doesn't work. the Arm positions to the preset record size but doesn't lower itself. Upon...
    Posted to The Workbench (Forum) by pimzel on Mon, Jun 18 2012
    Filed under: beogram, 1203, lift
  • Beocenter 2800 - Pickup arm won't lift from record

    Hi! The pickuparm on my Beocenter 2800 won't lift from the record when I hit "Stop" or the record is finished. Instead of rising a few mm before travelling back to its original position, it slides off the record, dragging the needle across the record. This also means that the pickup arm...
    Posted to Vintage Products (Forum) by Danslon on Wed, Oct 10 2012
    Filed under: Beocenter, 2800, pickup arm, Beocenter 2800, lift
  • Beogram 1700 (lift issues?)

    Hi. First post. I'm doing a favor for a friend who needed his Beogram 1700 given the once-over. I've restored DUALs for myself but but this is my first venture into these Danish beauties. Is there a good cleaning/lubing guide anywhere? But mainly these questions... His deck has the following...
    Posted to BeoGram (Forum) by Ryan on Mon, Dec 17 2012
    Filed under: Beogram 1700, 1700, lift, beogram
  • Beogram 2400 tonearm issues

    I just acquired a Beogram 2400 (flat front, controls under dust cover) and there appear to be several related, if not one large, issue(s) regarding starting record playback. When I press the 33 button, the platter spins, the tonearm drags itself across the aluminum plate, hits the edge of the platter...
    Posted to BeoGram (Forum) by mattgosselin28 on Sat, Feb 16 2013
    Filed under: tonearm, problem, lift, beogram, Beogram 2400, controls
  • beogram 1200 restoration

    i have a beogram 1200 i have been restoring and the automatic cueing mechanism drops about 5 mm to far out so if you were to just leave it it would not hit the run in groove and play but fall of how to adjust this , if anyone knows how to adjust this it would be much appreciated
    Posted to BeoGram (Forum) by beo3000 on Thu, Sep 24 2015
    Filed under: problem, Beogram 1200 1202 1203 3000, lift, beogram, operation, Repair, setup, help, issues
  • Re: Beogram 5005

    Paul have you since had the repair as I have the same problem with my 5005 tone arm not staying in the raised position. the B&O service repairer has informed me that the part is no longer available Triangle piece for the rod to lower. I am trying to scour the internet for any possible repairs or...
    Posted to BeoGram (Forum) by beo5005 on Fri, Aug 19 2016
    Filed under: tonearm, Beogram 5005, lift, tonearm not raising dragging needle beogram 4004 4002, Records, linear, arm, record, Repair, Beogram tonearm, Beogram Tonearm Hanging Too Low, 5005
  • beogram 6006

    Hi I have a beogram 6006 which when play is pressed it goes to the first track and plays fine. The problem is it won't allow manual cueing (<<,>>). Any ideas?suggestions would be great. Thanks chris
    Posted to BeoGram (Forum) by dingbat on Sun, Dec 22 2013
    Filed under: Beogram 8000, lift, controls
Page 1 of 1 (7 items)
Beoworld Security Certificate