Sign in   |  Join   |  Help
All Tags » hum (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the The Workbench forum. See all tags in the site
  • Re: What Are You Working On Now

    So today I replaced the transformer rubber bushings in my Beocenter 9500. It was a little awkward to lift the transformer in order to put new bushings underneath, but otherwise quite a simple task. First put the BC9500 in the service position (glass panels removed, of course!). I then removed the little...
    Posted to The Workbench (Forum) by Guy on Sat, Aug 14 2021
    Filed under: Beocenter 9500, hum
  • Re: First attempt at Beomaster 2400 'refurbishing'

    I thinks this project is almost done. Did a FM tuner check yesterday, reception is surprisingly good, with only a short length of 0.75mm2 wire pushed into the antenna plug Only headphone hum left to fix. Tried two different jack-to-mini-jack converters and 3 different headphone types so an issue with...
    Posted to The Workbench (Forum) by jesperb on Tue, Apr 9 2019
    Filed under: Beomaster 1900, beomaster 2400, hum, beomaster 1900-2
  • Beomaster 900M issue

    Hi :) I recently bought a Beomaster 900M along with some speakers. It semi-worked when I got it, but the right side speaker had a lower volume and was lacking bass. Last night I fiddled around with the stereo and tried to adjust the balance via the balance-adjuster on the back, which resulted in almost...
    Posted to The Workbench (Forum) by Mikkel on Sat, Sep 3 2016
    Filed under: Vintage Beomaster, Beomaster, Repair, hum, hot
  • Q: Beomaster 1900-2 - static hum

    Hello all I got myself a nice second hand vintage B&O set, that consists of: Beomaster 1900-2 -tuner/amp Beogram 2202 -turntable Beovox s30 -speakers all in white. They are in very nice condition externally, but for some reason the Beomaster gives a static "hum". Not very loud, but enough...
    Posted to The Workbench (Forum) by rokpete on Wed, Jul 13 2016
    Filed under: static, hum, beomaster 1900-2
  • Beolab Penta mains hum / buzz noise

    Hi all, Further to my project of upgrading my Beolab Penta IIs, I have completed all the cross-overs, and re-foams. The results are great. I used to think the Penta design had limitations in the tweeter with poor high frequency response but now with the mods I am very happy. One issue remains which was...
    Posted to The Workbench (Forum) by Gavin on Tue, Mar 10 2015
    Filed under: Repair, Penta, hum, buzz
  • Beomaster 901 hum and distortion

    Hello everyone I have recently managed to get hold of a beomaster 901 for a very reasonable price. However it being nearly 40 years old now it doesnt come without a few imperfections. I hope someone can help me resolve these issues. There is a 100 hz hum i the output. When the volume is set to 1/12th...
    Posted to The Workbench (Forum) by SilverV on Thu, Jun 19 2014
    Filed under: 100hz, hum, Beomasterster 901
Page 1 of 1 (6 items)
Beoworld Security Certificate