Sign in   |  Join   |  Help

Browse Forum Posts by Tags

Showing related tags and posts for the BeoGram forum. See all tags in the site
  • Beogram 9000 (Tangential Tracking) Inner Groove Distortion?

    Hi all, I seem to be having an IGD issue with my Beogram. The sound is rich and balanced until it gets to about halfway through a record, at which point sibilance and distortion ramps up severely, including on brand new records. It is worse with vintage records. The Beogram's recently been serviced...
    Posted to BeoGram (Forum) by WhatsGoingOn on Fri, Sep 1 2017
    Filed under: beogram 9000, inner groove distortion, beogram repair, sounds heavenly
  • Beogram 5500 String Help

    Hi! I recently acquired a BeoSystem 5500 and am having trouble with the Beogram turntable and the tone arms not moving along the tracking. I've opened her up and everything is in place as it should be (according to manual diagrams and pictures from the internet) except the white string inside has...
    Posted to BeoGram (Forum) by hotmessjessxx on Sun, Oct 8 2017
    Filed under: tonearm, problem, Beogram 5500, tangential, beogram, 5500, tangential arm issues, Beogram 5500, tracking, Beogram 5500 buzz, linear, turntable, record, Repair, Beoram 4000 slider tracking problems, help, Tracking Force, Beogram tonearm, issues, Beogram turntable issue, record player, beogram repair, pulley
  • Recommendations on shops to rebuild BeoGram 5500 turntables?

    I have two BeoGram 5500 turntables. One is working and I use it daily. However it has never been cleaned and serviced as far as I know. The other 5500 has some issues and also needs some service. I am considering sending both to Pyramid Audio in Austin, TX. It is only a couple of hours drive from my...
    Posted to BeoGram (Forum) by Couldbfishin on Sat, Jan 5 2019
    Filed under: Beogram 5500, beogram, 5500, beogram repair
  • Beogram 9500/MMC2 sound issue

    First post in this forum for me.I own/have owned a few B&O products. Bought a Beogram 9500 this wednesday. I have only one issue with it and I hope you can help me sort out what it is. The sound is really bad(distorted) when i start playing records. But if I disconnect and reconnect/wiggle the DIN7...
    Posted to BeoGram (Forum) by bag on Sun, Apr 8 2018
    Filed under: problem, tangential, Beogram 9500, vinyl, turntable, mmc 2, Repair, setup, Tracking Force, vintage, Beogram turntable issue, distortion, beogram repair, DIN
  • Re: BeoGram Standard Maintenance items

    [quote user="chris_in_cal"] belts lubrication points speed adjustments platter height adjustment speed trimmer (replace if necessary)[/quote] I have my replacement cartridge, and the replacement belt. I called several repair shops and one guy agreed to work on it. I'm going to bring it...
    Posted to BeoGram (Forum) by Chris on Tue, Aug 27 2019
    Filed under: beogram, beogram repair, new joiner, introduction, workbench, restoration
  • BeoGram Standard Maintenance items

    Hello, I bought an RX w/o a functioning needle, and I have a SMMC4 on order. There is a " Classic Audio Repair " facility here in San Diego, California that has a lot of positive yelp reviews. I'd like to have this 80s turntable serviced/maintained. What are the main things that need to...
    Posted to BeoGram (Forum) by Chris on Mon, Jun 24 2019
    Filed under: beogram, beogram repair, new joiner, introduction, workbench, restoration
  • Beogram 1900 restoration

    After a successful beomaster 1900 restoration, I am now trying to resurrect a beogram 1900. Its missing a cartridge, so i have ordered a mmc20en from FJS. Problems: The belt is broken. Have to figure out how to get a new belt as close to factory specs as possible. Any suggestions? Idler pulley shaft...
    Posted to BeoGram (Forum) by Kaarelt on Sat, May 4 2019
    Filed under: motor, belt, Beogram turntable issue, beogram repair, pulley, #repair, Beogram 1900
  • Beogram 5500 tone arm lowers too soon

    Hello, De tone arm of my Beogram 5500 lowers too soon and the needle will not find a groove but slide back off the record. I did not have this problem before, it started suddenly. Does anybody have an idea what might be causing this. Maybe some sensor for the tone arm to know when to lower itself is...
    Posted to BeoGram (Forum) by Brammie on Tue, Sep 24 2019
    Filed under: tonearm, 5500, Beogram 5500, vinyl, stopping, Repair, beogram repair, tone arm, beogram 5500 arm
  • Beogram 4002 repair within day drive of NC zip code 27410

    I have experienced motor speed consistency issues with my Beogram 4002. I found someone that I can send the motor to but I will have to pull it myself to ship for repair and then install back. I could do this but would rather not and anyway would really like a complete check up and refurbishment as needed...
    Posted to BeoGram (Forum) by JRock on Thu, Sep 26 2019
    Filed under: beogram 4002 5511 45 running slow, beogram 4002, 4002, speed, runnning slow, turntable, Beogram 4002 4004, flutter, beogram repair, help needed!, #repair
  • Beogram 5500 Carriage Stuck – Solved (I think)

    My Beogram 5500 (new in 1988) recently seized up after playing a record. The pickup lifted off to start its return, but the mechanism jammed and the pickup carriage stuck in a position that blocked attempts to open up the unit to investigate. I had to unhook the drive cord from the small pulley (part...
    Posted to BeoGram (Forum) by David on Thu, Mar 12 2020
    Filed under: Beogram 5500, beogram repair, beogram stuck tonearm solenoid linkage arm
Page 1 of 2 (11 items) 1 2 Next >
Beoworld Security Certificate