Sign in   |  Join   |  Help
All Tags » MCL (RSS)

Browse Forum Posts by Tags

Showing related tags and posts for the General Discussion & Questions forum. See all tags in the site
  • Re: Getting RDS data from Beomaster 7000

    A former Beoworld member Ridax has made a "BeoDisplay" that displayed the information from the MCL/Powerlink incl. RDS. His Project can be found here: BeoDisplay (archive.org) and the serial data format can be seen in the B&O Datalink '86 Circuit Description. Hope this give you some...
    Posted to General Discussion & Questions (Forum) by skolesen on Mon, Apr 26 2021
    Filed under: MCL, Beomaster 7000, RDS
  • Is this a powerlink cable?

    Hi all, I bought a bunch of MCL cables from ebay, and there is one 6-core cable that was used as a MCL extension cable between two wall plugs. Would I be able to use this as a MK 2 powerlink cable? Alternatively, would a MCL cable work as a powerlink MK2 cable if I connect a DIN8 plug? The only difference...
    Posted to General Discussion & Questions (Forum) by MJBeo on Tue, Sep 19 2017
    Filed under: MCL, powerlink mk2
  • Multiple ML-MCL and Beocenter 2500

    Here is the predicament I would like to connect a set of AKG K1000 passive headphones to the Beocenter2500. The K1000 requires more power output than the headphones-out on the 2500 can deliver so the solution would be to attach an ML-MCL unit via one of the PowerLinks outputs. However as I understand...
    Posted to General Discussion & Questions (Forum) by drdevinci on Wed, Feb 10 2016
    Filed under: MCL, Beolab 8000, 8000, MCL 2P, Beolink Passive, Beolink MCL 2A Powerlink Speakerlink Beolab, Beosystem 2500, Beocenter 2500, 2500, ML/MCL converter, BC2500
  • Connecting Master Control Link (MCL) and Master Link (ML). Devices needed?

    Gentlemen, I have been looking for the below information on Beoworld & other sites without luck. Sorry if this has been discussed many times before. Let's say we have a setup of... Main room: - Beocenter 9300 - Beovision MX 7000 Link room: - Beolab 3500 How should these be connected? Option 1...
    Posted to General Discussion & Questions (Forum) by Fod on Thu, Feb 4 2016
    Filed under: MCL, 1611, BL3500, ML, 1615
  • Re: Problems with VX Sensor on Lintronic -238

    [quote user="hfat"] and here is the soldering of the plug.... [/quote] Sorry for bothering in this old thread but I have not yet been able to solve the problem of the soldering, to enable the use of a VX sensor or MCL transceiver on Lintronic. For the background information: I found out that...
    Posted to General Discussion & Questions (Forum) by MJBeo on Mon, Jan 19 2015
    Filed under: Lintronic, MCL, VX sensor
  • Difference between "Type 2046" and "Type 2047"

    Hallo everyone I am wondering if you can all help me out and tell me the difference between the (master link) signal box "type 2046" - of which I already have a few - and (master link) signal box "type 2047" - of which I don´t owe any as of yet.....?? I am wanting to hook up...
    Posted to General Discussion & Questions (Forum) by Vus on Tue, Jan 6 2015
    Filed under: MCL, Masterlink Module, speaker, passive speaker, MCL X-tra Speaker
  • Problems with VX Sensor on Lintronic -238

    Hi, I have a Lintronic -238 (software 5.1), and I would like to connect a IR eye to it. I have a complete MCL system, so I do not want to add a 'modern' round eye ( TT-IR-8087030) to my setup. I already have a VX sensor with 3,5mm plug, and going through all the old forum posts tells me it should...
    Posted to General Discussion & Questions (Forum) by MJBeo on Wed, Jul 2 2014
    Filed under: Lintronic, MCL, VX sensor, TT-IR-8087030
  • Newbie Q: Setting up link room

    Hi, I have a Beosystem 7000 connected to an Avant DVD via a Beolink 1611 converter in my living room. I would like to set up a link-room with IR eye and passive speakers in the adjacent kitchen. After looking at the documentation, I see that the Avant is actually connected to the TV/AUX connector on...
    Posted to General Discussion & Questions (Forum) by Brian on Mon, Jun 23 2014
    Filed under: MCL, masterlink, Beomasterter 7000
  • Timer function not working on mixed ML/MCL system

    I have a BC9500 connected to BV3 via BeoLink Converter 1611, plus an MCL link room. I have just set up an additional ML link room using a Passive. It works fine, but will not activate on the Timer function - i.e when the timer is set on the BC9500 and also selected on the ML IR puck. I've checked...
    Posted to General Discussion & Questions (Forum) by Guy on Wed, May 15 2013
    Filed under: MCL, multiroom, ML
  • MCL2 AV error in volume control

    I have a beomaster with beovox RL35 in my main room, which is connected to a MCL2A with beovox RL 60.2 on the other side of the main room (set to option 4), which in turn is connected to a MCL2AV with MCL2P and beovox CX100 in the bedroom, which in turn is connected to a MCL2A with Beovox CX50 in the...
    Posted to General Discussion & Questions (Forum) by MJBeo on Sun, May 12 2013
    Filed under: MCL, MCL2AV
Page 1 of 2 (12 items) 1 2 Next >
Beoworld Security Certificate

SSL