Sign in   |  Join   |  Help

Browse Forum Posts by Tags

Showing related tags and posts for the BeoGram forum. See all tags in the site
  • Beogram 5500 carriage string fabrication

    I recently acquired a BG5500 for restoration and found that the carriage drive string and its spring were both missing, mostly likely because the post H was broken off. I fitted a small screw, washer and nut to create a new anchor post as recommended many times in the forum. After searching for a while...
    Posted to BeoGram (Forum) by Gordon Venters on Wed, Feb 10 2021
    Filed under: Beogram 5005, Beogram 5500, Beogram 3000, Beogram 9500, beogram 3300, beogram 9000, Beogram tonearm, Beogram 3500, beogram 4500, Beogram tx2, Beogram 6500, Beogram 8500, Carriage, String
  • Using a Beogram turntable for streaming

    Hi everybody I thought about using a Beogram 3000 (59xx) as a ‚standalone’ streaming source. Does anyone know about a solution using a Raspberry Pi or an Arduino? Are there other / simpler ways? Inputs would be much appreciated. Looking forward to lots of suggestions, Nietz.
    Posted to BeoGram (Forum) by Nietz on Sun, Dec 6 2020
    Filed under: Beogram 3000, 3000, streaming vinyl
  • Beogram 3000 cueing problem - doesn't sense the record?

    Hello everyone, I've finally made an account now that I've got a problem that needs solving! I have an early-80s Beogram 3000 (type 5903) that, after sitting dormant for a few years, no longer plays. The unit powers up, the platter spins, and then it shuts off. A light does shine across the record...
    Posted to BeoGram (Forum) by Nick Brown on Fri, Nov 27 2020
    Filed under: Beogram 3000, #repair
  • Beogram 3000 (5228) DIN Wiring

    Hello All, I am missing a channel on my Beogram 3000 (5228), so i checked the DIN plug, and 2 wires was detached. see photo: Can someone tell me witch cable goes to what pin? hmm not easy to see on these images. Maybe someone has a diagram showing whats what? Thank you :) Allan
    Posted to BeoGram (Forum) by AllanDam on Tue, Nov 24 2020
    Filed under: Beogram 3000, turntable, DIN
  • Beogram 3000 Tonearm movement

    Hi Everybody, I am new to this forum, and even though I have searched the forum, I did not find info about my problem. Maybe this has been asked 1000 times before, so please bear with me. I have just bought a Beogram 3000, and i am in love with the design and the feel. But there is one hair in the soup...
    Posted to BeoGram (Forum) by AllanDam on Tue, Nov 17 2020
    Filed under: tonearm, Beogram 3000, 3000, Beogram turntable issue, tone arm speed, #repair, tone arm
  • Beogram 3000 5901 No sound from output

    Hello I'm new to turntables, and bought a Beogram 3000 type 5901 kind of cheap (ca 80USD). The first time I pluged it in my stereo, it didn't give much sound, I could hear the music from the needle, but that's it. I talked to some locals who are pioneers in turntables who said I needed an...
    Posted to BeoGram (Forum) by Ollis on Mon, Oct 21 2019
    Filed under: Beogram 3000, Beogram 3000 not working, beogram 3000 5901
  • Beogram 3000 (5241 model) hinge repair and arm movement

    I'm in the process of making new acrylic hinges to glue to the broken pieces of the existing turntable lid. However, it appears to me that by doing so, the hinge nearest the tonearm will impede the travel of the tonearm itself. The counterweight looks like it will strike it before the autolift cuts...
    Posted to BeoGram (Forum) by Jacobsladder on Tue, Jun 20 2017
    Filed under: Beogram 3000, Dust cover, Dustcover, arm, weight, Repair, 3000, 5241
  • 1974 Beogram 3000 (5241 model) manual operation

    When I turn the operation button to "On", the turntable goes into the automatic "30" mode, rather than just begin revolving the platter. Effectively, I have no manual operation function I'm sure that's not right and it feels as if a switch is sticking, or shorting with the...
    Posted to BeoGram (Forum) by Jacobsladder on Tue, Jun 20 2017
    Filed under: problem, Beogram 3000, turntable, operation, Auto, 3000, On switch, manual
  • Beogram 3000 (1985-1986) tangential tracking Arm questions

    Normal 0 false false false MicrosoftInternetExplorer4 Hi All Sorry a bit of a long post but trying to give as much detail as possible. For the last four years I have been the custodian of my dads Beocentre 9500 that he has owned since 1989, he was the Authorised dealer in the late 80's early 90's...
    Posted to BeoGram (Forum) by SamuelT on Wed, Jun 7 2017
    Filed under: mmc4, Beogram 3000, mmc 4
  • Beogram 3000 Repair

    Hi there Everyone. I am the latest owner of a Beogram 3000. My first turntable! I won this turntable on Ebay which was said to work perfectly. Traveling for 3 months I left the turntable packaged until I could set it up in a permanent home. I removed it from a very poorly packaged box to find the thing...
    Posted to BeoGram (Forum) by matthuplacek on Fri, Jun 26 2015
    Filed under: Beogram 3000, turntable, Repair, beogramam, vintage, 3000
Page 1 of 2 (20 items) 1 2 Next >
Beoworld Security Certificate

SSL