Sign in   |  Join   |  Help

BeoVox HT500 - Speaker replacement for broken Tweeter ?

rated by 0 users
Not Answered This post has 0 verified answers | 4 Replies | 1 Follower

KolfMAKER
Top 500 Contributor
The Netherlands
130 Posts
OFFLINE
Silver Member

In my BeoGram 1500 restoration project, I also have 2 BeoVox HT500 speakers. These have a Low/mid-tone speaker and a seperate Tweeter.

All speakers are in bad condition and need replacements. For the Low/Mid-tone speakers I already found replacements. For the Tweeters I did not find replacements yet.

Specification wise, I only know this (see attached picture):

  • 4 ohm tweeter
  • Outside dimension 65 x 65 mm

 

Question

  • Who has information about good replacements?
  • Tweeters close to the sound of the original, and fitting in the casing. 

 


All Replies

Dillen
Top 10 Contributor
Copenhagen / Denmark
12,802 Posts
OFFLINE
Founder
Moderator
Dillen replied on Wed, Jun 9 2021 11:47 AM

Are they all bad?
How?

Martin

KolfMAKER
Top 500 Contributor
The Netherlands
130 Posts
OFFLINE
Silver Member

Unfortunately, 3 of the 4 speaker drivers are bad.

The Low/Mid-tone speakers: the conus paper has been wet and now is deformed. The edged are in some spots completely worn out and have been ripped.

One of the tweeters has torn conus paper, and is heavily damaged on the edge. Therefor, I would like to replace them both for sound consistency.  

Dillen
Top 10 Contributor
Copenhagen / Denmark
12,802 Posts
OFFLINE
Founder
Moderator
KolfMAKER
Top 500 Contributor
The Netherlands
130 Posts
OFFLINE
Silver Member

Thnx Martin

I sent you an email about this.

Page 1 of 1 (5 items) | RSS
Beoworld Security Certificate

SSL