Sign in   |  Join   |  Help

Problem with Beolab 5 room calibration system

rated by 0 users
Not Answered This post has 0 verified answers | 2 Replies | 1 Follower

Damir Grgic
Not Ranked
Dubai, UAE
21 Posts
OFFLINE
Bronze Member
Damir Grgic posted on Tue, Sep 15 2020 9:41 AM

The client has an issue with room calibration on Beloab 5:

The calibration mic comes out half way, then fully, then retracts again and gives a red signal light.

 

Any ideas what might be wrong and how to rectify it?

 

Thanks

All Replies

Beobuddy
Top 25 Contributor
Utrecht, The Netherlands
3,747 Posts
OFFLINE
Founder
Beobuddy replied on Tue, Sep 15 2020 11:20 AM

Damir Grgic:

The calibration mic comes out half way, then fully, then retracts again and gives a red signal light.

Sounds normal. Only when the red light is blinking, the servicetool can be used to read a possible failure.

 

CB
Top 75 Contributor
> You are Here <
1,500 Posts
OFFLINE
Bronze Member
CB replied on Wed, Sep 16 2020 7:05 AM
Damir Grgic:
The calibration mic comes out half way, then fully, then retracts again and gives a red signal light.

But does he hear the calibration sound?

Is the problem with both BLs or just one?

If there is no sound, it is a hardware problem

If a sound is emitted and the red light is on on only one BL, then the calibration is not successful: try to move the cabinet which is too close to this BL, or try to turn the BL to avoid this cabinet
Page 1 of 1 (3 items) | RSS
Beoworld Security Certificate

SSL