Sign in   |  Join   |  Help

MLGW + BS9000

rated by 0 users
Not Answered This post has 0 verified answers | 6 Replies | 0 Followers

Silou
Top 200 Contributor
Switzerland
432 Posts
OFFLINE
Bronze Member
Silou posted on Sun, Sep 29 2019 7:37 PM

Hi,

I'm beginning with MLGW. 

After a full reset, tick on "enable MLGWprotocol over RS232".

With a terminal program when MLGW is powered on we see over RS232 the boot process. 

After a while led is green. When sending with BEO4, for example CD, nothing appears on the RS232 ! 

Should I enable something else ?

(BS9000 MKI SW 2.21, MLGW 2.24 )

Thanks !

All Replies

beojeff
Top 75 Contributor
USA
1,699 Posts
OFFLINE
Bronze Member

Are you using the web browser interface for programming the MLGW? It has it's own feature for monitoring the B&O data traffic.

beojeff
Top 75 Contributor
USA
1,699 Posts
OFFLINE
Bronze Member

You have to recognize the BS9000 as a "node" on the MLGW via the web interface.There are useful help files here:

http://mlgw.bang-olufsen.dk/source/documents/

Silou
Top 200 Contributor
Switzerland
432 Posts
OFFLINE
Bronze Member
Silou replied on Tue, Oct 1 2019 2:39 PM

Yes I'm using web browser.

Maybe I missed the assignment. I'll try again.

But I can't select BS9000 with "assign single product". Are listed only BV10,6 et BL3500...

Silou
Top 200 Contributor
Switzerland
432 Posts
OFFLINE
Bronze Member
Silou replied on Wed, Oct 2 2019 7:36 AM

it works! But not very useful . You get only sources (CD Tuner) and nothing else. I hope to get more  trafic on ML. 

beojeff
Top 75 Contributor
USA
1,699 Posts
OFFLINE
Bronze Member

Silou:

Yes I'm using web browser.

Maybe I missed the assignment. I'll try again.

But I can't select BS9000 with "assign single product". Are listed only BV10,6 et BL3500...

It sounds like perhaps the MLGW has not been reset since the previous owner and still has the previous owner's configuration. You must put the MLGW into a mode to detect your BS9000, then you use a command on the BS9000 for it to be detected by the MLGW. The help files walk you through the process.

Silou
Top 200 Contributor
Switzerland
432 Posts
OFFLINE
Bronze Member
Silou replied on Wed, Oct 2 2019 7:00 PM

Did a all reset an repeated the assignment process 

it works! But not very useful . You get only sources (CD Tuner) and nothing else. I hope to get more  trafic on ML

 

Thanks beojeff

Page 1 of 1 (7 items) | RSS
Beoworld Security Certificate

SSL