Sign in   |  Join   |  Help

Beomaster 3000 (model 2402)

rated by 0 users
This post has 1 Reply | 0 Followers

Mek82
Not Ranked
Posts 2
OFFLINE
Bronze Member
Mek82 Posted: Mon, Sep 16 2019 8:59 PM

I have been so lucky, I hope, to win an auction, for 3 beomaster 3000.

one should be in working order, the other two sold as repair/spares.

I haven’t had the time yet to test them. Nor the speaker plugs.

I know, that right now, the two 3000 that are not working, the reason could be anything from a fuse or something much worse.

What I want to ask, as this is my first piece of vintage HiFi, apart from the Lenco L75 I found at the curb side left for thrash.

Is there anything I should look out for in the pieces that doesn’t work? Or some tips and tricks? 

 

https://imgur.com/Wf1GMz8

https://imgur.com/jLP7nG1

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 10,907
OFFLINE
Founder
Moderator
Dillen replied on Tue, Sep 17 2019 5:04 PM

It's safe to say, that all of these lovely beasts will need a thorough restoration by now, rather than discrete repairs.
A general service kit is available (capacitors, tantals, trimmers, lamps), and then any eventual remaining faults will have to be diagnosed and repaired,
In most cases I would recommend doing the repairs before restoring, mainly because of the risk of introducing more faults while restoring, but
in some units there are so many components prone to aging, that it can be next to impossible to diagnose the (often many) individual faults - and
many of the faults will be in the aging components themselves anyways.

Always worth restoring nice units.

Martin

Page 1 of 1 (2 items) | RSS
Beoworld Security Certificate

SSL