Sign in   |  Join   |  Help

Repair Beogram 1202 lid

rated by 0 users
Not Answered This post has 0 verified answers | 1 Reply | 1 Follower

Not Ranked
3 Posts
Bronze Member
lajetee posted on Thu, Jun 27 2019 9:00 PM


This is my first post so please forgive any netiquette faults!

I work as a volunteer in a Repair Cafe. A client recently brought in a Beogram 1202 turntable that wasn't working. I fixed the whole motor/arm combo and it is now working.

They also showed me the (half-disassembled) lid that they had. I (foolishly?) offered to try and fix that too. I find that there are two, handed, long (torsion bars?) that, I guess, counterbalance the lid as it's being opened. I can't see how they fit. There is a clamp in the frame that enables the bars to be inserted by sliding the pins in. They can be inserted in 'Pin up' or 'Pin down' mode. Which? Does Torsion bar A go left or right? How does the torsion bar fit into the end plate?And, finally, why are the little washers - that do go on the torsion bars - strangely slotted. I'm puzzled! Can anyone help? Thank you very much.

I have pictures that make all this much clearer, but Beoworld doe not seem to allow pictures to be attached to posts. Sorry.

George May

All Replies

Top 75 Contributor
1,331 Posts
Gold Member

Hi there

I cannot help you with the lid - but ofcourse you can attach pictures. Wink
If you read some of the other postings, you can see that many users are attaching pictures to their posts...

When you write a post, click at the icon "Insert media" - you will then see a pop-up window where you can choose between media "from site" or "from URL".
If you choose "from site" you'll have to have uploaded your pics to your profile first. 

Hope this was useful.


Page 1 of 1 (2 items) | RSS
Beoworld Security Certificate