The tone wont drop on the record.
Everything is perfect on the table but this issue.
Figured before I started poking around. That someone may have a sure shot remedy to get this deck going?
Thanks!!
Does the tonearm stop and hover over the lead-in groove or just pass over the record and return to park?Has the tracking force been set correctly?
Martin
Hi Martin,
The tonearm does stop, and hover over the lead-in groove. The tracking force is set at 1.5g for the mmc 5 Cartridge.
I just pulled mine out of storage and have the same problem..works perfect but arm will not lower. Have you fixed your yet?
I have! However, I can’t recall what I did to make it drop. I want to say I made an adjustment to screw of the left of the tonearm.
Sorry I can’t be more help.
I can't locate my manual. Can you be more specific on the screw?
Sorry about the delay..... attached is a picture from the 8000 that I used.
Thanks..I found a manual online and it has the same picture. Gonna clean it up and see what happens. Will let you know how it goes.
Update...blew the carriage and area out with low pressure air and used the play and pause buttons. Arm now goes down. Need a preamp now to see how it sounds.
GREAT!!