Sign in   |  Join   |  Help

Leaning towers of Beolab

rated by 0 users
Answered (Not Verified) This post has 0 verified answers | 2 Replies | 1 Follower

Not Ranked
New Hamphire USA
4 Posts
Silver Member
Doug posted on Tue, Jul 18 2017 6:18 PM

I have a pair of 8000 which I just moved out of storage.... incorrectly.   That is,  I do not have original packing, and I moved them - carefully I thought - laying on padded surfaces on their backs but the bolts that connect to the bases bent slightly.   Is there already a thread in which this topic had been addressed?   I can't be the first person to deal with this problem.

All Replies

Top 10 Contributor
Eastbourne, UK
7,155 Posts
Answered (Not Verified) 9 LEE replied on Tue, Jul 18 2017 11:33 PM
Suggested by 9 LEE

Just stand them up, and very gently (and slowly) bend them back again..  As long as you're not rough with them you'll be fine.

FYI, I've done this many times over the last 13 years! Yes - thumbs up


Top 25 Contributor
3,793 Posts
Silver Member
Jeff replied on Wed, Jul 19 2017 4:56 PM

What Lee said, I've done the same thing. I took them apart to move them to our new house, and noticed they were not straight, so I slowly and carefully bent them back straight,or straight-ish. I finally had to stop looking too carefully at them as I had them very close to perfect but was getting a bad case of OCD about it. Surprise


I'm afraid I'm recovering from the BeoVirus. Sad

Page 1 of 1 (3 items) | RSS
Beoworld Security Certificate