Sign in   |  Join   |  Help

MCL2AV Type 2026 - SW2.3 - polarity of the DC power input

rated by 0 users
Not Answered This post has 0 verified answers | 1 Reply | 2 Followers

Top 50 Contributor
2,452 Posts
Bronze Member
kallasr posted on Thu, May 5 2016 3:26 PM

Dear Forum,

since my newly added MCL2AV has got no power adapter, I just bought one from Amazon.

Now the question is: what polarity do I need to use?

I will try to use the MCL2AV with transceiver to use a second Beosystem in my Office (Link Mode).

Thanks for your help!


Living Room: Beosystem 4, Beolab 7-6 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Panasonic TX-P65STW60
Home Cinema: Beosystem 4, Beolab 7-2 (Center), Beolab Penta 2 (Fronts), Beolab 4000 (Rears) and Beolab 2. Projector: Sony VPL-HW55
Home Office: Beovision 10-40 on STB Bracket wall mount masterlinked to Beosound 9000 MK3 on horizontal wall bracket driving Beolab 5000 Speakers
Bedroom: Loewe TV with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s). 

All Replies

Top 150 Contributor
near Munich
571 Posts
Gold Member
RaMaBo replied on Fri, May 6 2016 11:39 AM

Hello Ralf,


for the power connection you need the polarity scheme on the right side. The positive 15 V has to be on the outer connection and ground has to be on the middle hole of the power cable.

The MCL2AV power connection has the ground at the center pin and the +15V have to be supplied via the shield connector.



Page 1 of 1 (2 items) | RSS
Beoworld Security Certificate