Sign in   |  Join   |  Help

BV10 with Beosystem 3 - Question for Center Speaker

rated by 0 users
Not Answered This post has 0 verified answers | 4 Replies | 1 Follower

Tomvdw
Top 500 Contributor
177 Posts
OFFLINE
Founder
Tomvdw posted on Sun, Mar 13 2016 6:13 PM

Hi,

planning to use a Beosystem 3 for home cinema reason in the living room where a BV10 alreay resides:

is it possibel to use the BV-Speaker as Center Speaker or do I have to install an additional speaker e.g. below to the TV ?

King Regards

Thomas

All Replies

kallasr
Top 50 Contributor
Germany
2,557 Posts
OFFLINE
Bronze Member

Hello Thomas,

did you search the (archived) forum on this subject?

http://archivedforum.beoworld.org/forums/t/35319.aspx

It might be easier to use some sort of HDMI matrix/switch.

Ralf

Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096
Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)

In storage: Beolab 5000/Beomaster 5000 (1960s). 

Tomvdw
Top 500 Contributor
177 Posts
OFFLINE
Founder
Tomvdw replied on Mon, Mar 14 2016 7:51 AM

Hi Ralf,

thanks for your suggestion, but my question is different to the linked one. I would like to use a beosystem 3 which controls my Beolabs and the beamer. I would like to use my BV10 as the primary display (beamer is the sencondary). 

My question is: (how) can I use the build-in speaker of my BV10 as center in TV mode ?

The center in cinema mode will be another one.

Regards

Thomas

kallasr
Top 50 Contributor
Germany
2,557 Posts
OFFLINE
Bronze Member

I understand.

I was just thinking about "why use a BS3 AND a BV in one room", if you might be able to use the processor inside the BV instead of a BS3...?

So you want to use the HDMI out of the BS3 and the HDMI in of the BV10?

No idea how this could work (option settings?)....

Ralf

Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096
Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)

In storage: Beolab 5000/Beomaster 5000 (1960s). 

Millemissen
Top 10 Contributor
Flensborg, Denmark
14,608 Posts
ONLINE
Bronze Member

The only 'solution' I could think of, would be to connect all external speakers to the BSys3 and the HDMI-out (of the BSys3) - using a HDMI splitter - to the BV10 (HDMI-in/call it ? V.Mem) and your projector.

One of the devices would have to be in Option4, then - in order to control them in the same room.

N.B. The speaker of the BV10 would not be a 'real' center speaker, since it would work in stereo!

Kind off odd constellation, I must admit ;-)

MM

There is a tv - and there is a BV.

Page 1 of 1 (5 items) | RSS
Beoworld Security Certificate

SSL