Sign in   |  Join   |  Help

Remote in link-mode?

rated by 0 users
Not Answered This post has 0 verified answers | 6 Replies | 2 Followers

Stones
Not Ranked
52 Posts
OFFLINE
Founder
Stones posted on Thu, Apr 2 2015 7:32 PM
Hi

The AV Terminal might locked in link mode for operating link products in link option 4. An L appears on the little display. Is it possible to lock BeoLink 1000 or Beo4 in a similar way, or do I have to press LINK every time?

Best regards

Steinar

All Replies

tompa
Not Ranked
64 Posts
OFFLINE
Bronze Member
tompa replied on Thu, Apr 2 2015 8:38 PM

Hi,

with beo 4 new model with joystick you can lock it to linkmode with zone,and with some older beo4 you could lock it with a "secret" code to link mode

but was long time ago i use it so i don't remember how, but will try to see if i can find it somewere...

Emil
Top 500 Contributor
127 Posts
OFFLINE
Bronze Member
Emil replied on Thu, Apr 2 2015 8:39 PM

On Beo4 go to config (standby button + list) and then press 2002. Not sure about BL1000.

Millemissen
Top 10 Contributor
Flensborg, Denmark
12,342 Posts
OFFLINE
Bronze Member

@Emil,

for those, who want to 'try this out', please do tell, how to reset it again.

MM

There is a tv - and there is a BV.

Emil
Top 500 Contributor
127 Posts
OFFLINE
Bronze Member
Emil replied on Thu, Apr 2 2015 9:02 PM

Oh, sorry! Missed that... As far as I remember it would actually be the same combination. I use it for one of my own tv's that are a bit close to one of the others. Beo4 are really powerful remotes. 

Stones
Not Ranked
52 Posts
OFFLINE
Founder
ThanksSmile
Guy
Top 50 Contributor
Buckinghamshire
1,579 Posts
OFFLINE
Gold Member
Guy replied on Wed, Sep 18 2019 2:20 PM

An old thread I know, but I have a couple of questions about the Beo4 'link-mode'.

I just set up a BC6-23 in my bedroom.  The bedroom overlooks the lounge (which contains my BC9500), so I put the BC6 in V.OPT 4 so that I could put a Beo4 in 'LINK' mode (as explained above) to control it without affecting the BC9500.

It works fine, but I have two questions:

- Does LINK-mode reduce the IR power of the remote?  It seems to be much more directional now.

- Should I be able to use the 'link-mode' Beo4 to still control the BC9500 by selecting/pressing 'LINK' before the control?  I can't get this to work, and it would be useful for when I want to lean over the balcony and control the BC9500.

Page 1 of 1 (7 items) | RSS
Beoworld Security Certificate

SSL