[KolfMAKER]

In the process of re-building the original BeoGram 1000 Pre-Amp PCB …

I am now selecting the capacitors for my order. I noticed that it is hard to find the exact same values as the originals. For the voltage it is not such a problem, I can just step up the value for the voltage, and it will still work.

For the capacitance I am not sure. For instance, a capacitor with 32uF is hard to find. Though I do find 33uF. Also 1.6uF cannot be found, but 1.5uF is available.

Also 80uF, I cannot find.

 

Question

1. Will choosing 1.5uF instead of 1.6uF work?
2. Same; will choosing 33uF instead of 32uF work?
3. Same; will choosing 100uF instead of 80uF work?
4. Same; will choosing 150uF work instead of 125uF?

 

PS. I have searched via:

• https://www.nichiconcapacitors.com/shop/
• https://nl.rs-online.com/web/c/passive-components/capacitors/aluminium-capacitors/
• https://nl.farnell.com/c/passive-components/capacitors/aluminium-electrolytic-capacitors/leaded-aluminium-electrolytic-capacitors

 

• This reply was modified 1 year, 6 months ago by KolfMAKER.
• This reply was modified 1 year, 6 months ago by KolfMAKER.