Reply To: A question on circuit board from my beolab 6000

#7379
Guy
Moderator
  • Warwickshire, UK
  • Topics Started 4
  • Total Posts 196

You’d have to remove both the bridges (i.e below each 120V label) and replace across the 240V.

If you consider that the transformer winding terminals are numbered 1 to 8 from the left, then for a 240V supply you need 1 to be connected to 5 (hence the bridge), with the input  supply connected to 4 and 8.

(That’s from the service manual – avail to Silver and Gold Members!)