Reply To: Beolink 5000 E-Ink screen repair / mod

  • Warwickshire, UK
  • Topics Started 4
  • Total Posts 203

Hi Pilatomic,

In my experience Beo4 screens do fail, but replacement is actually quite straightforward because connection to the PCB is via a little rubber ‘contact strip’ – a replacement strip is provided with the new screen.  There’s no soldering or anything complicated.  There’s a replacement thread on the old forum but the photos have yet to re-appear:

I did read a post that B&O were going to stop making/supplying new Beo4 screens, but I didn’t have any problems getting hold of some recently. (EDIT:  It was David656’s post just above that I’d read! 😊)