Reply To: Beogram 8002 cleanup

#6728
spassmaker
BRONZE Member
  • Topics Started 3
  • Total Posts 36

Looks like the sysmtoms you get if:

Caps are not excanged, ALL incl. the 47uF in the CPU can. Just have one on the table where the 47 uF was divided into two parts. The Beogram made quiet funny moves ;-))

Lightbulb in the Control panel not working or weak, misadjusted voltage at the light sensors (620mV) for << and >>

Fact is if you try to renew only some of the old caps nobody knows when the next will die, so please no “quick and dirty” restauration.

look here for further information:

https://beolover.blogspot.com/2016/02/beogram-8002-strange-behavior-after-play-arm-moves-2cm.html

Here is a good example about Transistor HFE :

https://beolover.blogspot.com/2019/12/beogram-8000-fun-evening-with-record-detection-mechansim.html

Kind regards

Christian