Home › Forums › Product Discussion & Questions › BeoGram › Beogram TX2 solenoid flatter › Reply To: Beogram TX2 solenoid flatter
16 June 2022 at 10:02
#28865
Hi Mark,
I can verify 12.1 VDC at P3-2 and 12.09 VDC at the solenoid. So far I haven’t checked
C3 and C4 which are easy enough to replace. It had been suggested to replace those two caps but am almost certain both are fine ?!
will repirt back once they have been replaced. Thank you for your contribution 👍
ALF