Reply To: BeoMaster 7000 to BS Core

#5446
Steve at Sounds Heavenly
Moderator
  • Topics Started 11
  • Total Posts 74

Hi Kiran,

I have just sent you a full reply to your email, but basically I suggest using the Powerlink outputs of the 7000 instead of the Line socket, this generally works better as you have the option of adjusting volume from the Beo4 or the B&O app when switching sources on the 7000 (eg. as the Beogram is usually a bit quieter than other sources).

This cable will connect from one of the Powerlink outputs of the 7000 to the 3.5mm line inputs of your Core:-

https://soundsheavenly.com/televisions/158-2365-powerlink-to-beovision-14-harmony-eclipse-horizon-avant-ng-2017-on-cable-link-your-audio-system-to-your-new-tv.html#/2-length-1m

Please set the Beomaster volume to a high level (50-75%) to give you the full range of volume control from the B&O app.

Kind regards, Steve.