[Steve at Sounds Heavenly]

Hi jjcox,

Whilst the NL/ML Converter is an option, you can get great results with a £20 cable, without needing the £650 converter.

This cable will connect from one of the Powerlink outputs of the Beosound 3000 to the 3.5mm line input of your Core:-

https://soundsheavenly.com/music-output/177-2544-powerlink-to-beosound-level-emerge-balance-stage-core-edge-shape-cable-link-your-bo-audio-system-to-your-new-speaker.html#/2-length-1m

Please set the Beosound volume to a high level (50-75%) to give you the full range of volume control from the B&O app.

Alternatively, you can link the Beosound 3000 to the RCA line inputs of the two speakers directly via this cable:-

https://soundsheavenly.com/bang-olufsen/110-329-5-pin-din-to-twin-rca-powerlink-compatible-to-non-bo-hifi-amplifier-receiver-etc-din-to-twin-phono.html#/2-length-1m

(IMPORTANT NOTE: ONLY BEOLAB 5, 17, 18, 19, 20, 28, 50 AND 90 CAN ACCEPT INPUTS FROM MULTIPLE DEVICES AT THE SAME TIME, OTHER SPEAKERS CANNOT DO THIS!)

Kind regards, Steve.