Home Forums Product Discussion & Questions BeoVox BEOVOX MS 150.2 Woofer Reply To: BEOVOX MS 150.2 Woofer

#46780
spassmaker
GOLD Member

    Hi

    In between I dissassembled the 8″ and 10″ woofers from the cabinet.

    The coils are measuring all good so far.

    I decided to bring them back in shape as following:

    Took some aluminium profiles 10X10 mm and put them underneath the cone to lift the cone upards about 1 cm above the metal frame.

    Sprayed with a small amount of water front and back of the cone and let them laying cone downwards on the table over night.

    The weight of the chassis gave the right amount of pressure to the cones and next day it looked very good for me.

    on the picture you could see the result.

    Does anybuddy have a good source for the front fabric? Mine have some small holes and not looking good anymore.

    20230523_220205

    20230523_220142

    20230523_220130

    Still a little bit dirty but that will be no problem so far ;-))

    Waiting for the foam surrounds…..

    Kind regards

    Christian