Reply To: First start of a BM6000 “not Working”

March 3, 2023 at 10:20 am #16925
spassmaker
BRONZE Member
    • Topics Started 4
    • Total Posts 76

    Hi

    When you try to set the idle current measure the voltage at the speaker outlet

    (speaker switched ON 😉  ) or L201 on power amp board.

    Look for DC voltage more than 0.1 Volt.

    Often had this issue, look if you get any variations when you try to adjust the OFFSET Voltage with R210. If not adjustable check TR201 to 205, best to desolder them because some of them are connected in paralel.

    Seems that when you are through with this BM 6000 you can call yourself

    CEFBM 6000 (certified expert for Beomaster 6000 issues ;-))

    Regards

    Christian