Reply To: Beolab 8000 turn off after some hours

#14923
carljh
BRONZE Member
  • Topics Started 1
  • Total Posts 8

    I made some more testing yesterday and realised that I connected the wrong pin in the DIN connector for the 5V power on activation signal. When the speaker get into the error stage after some hours it is possible to turn it on by 5V on pin 4 in the DIN connector. I assume this mean that the error is in the autostart circuit so I will look there, see attached picture I found in another post.

    Attachments:
    You must be logged in to view attached files.