Reply To: Beomaster 6000 Power-On Issue

#14874
quattttro
BRONZE Member
  • Topics Started 1
  • Total Posts 20

Sorry but if you have 15V at emitter TR27 and 14.3V at Base then TR27 as a PNP type should turn on. (0,7V on its BE-diode) I would check TR27… hx

TR27 tests fine on the transistor tester, nonetheless, i swapped it out for another one. Same thing, nothing on the collector.  In any case, this is probably secondary, as the relay should not be switched on in standby mode.

  • This reply was modified 1 week, 2 days ago by quattttro.