Reply To: Evan’s MK2 BeoLab Pentas

GOLD Member
  • Topics Started 4
  • Total Posts 53

    Things were going well.    ….until they weren’t! The outer flange of the surround was starting to wrinkle and not lay flat so I frantically ran around to try and find something to hold them down while the glue set. Luckily we are a well equipped office and have drink vessels of the exact-right size for this job.


    While the glueing-up was taking place, I also made sure that I ran some signal through them to ensure no nasty misalignment and coil rubs were to take place.