Reply To: Beolab 3500 and 1611 converter settings…

#14326
matador
Moderator
  • Paris France
  • Topics Started 37
  • Total Posts 503

    the PL trigger voltage seems to force BL1611 into audio mode.

    Seems logical since this is why a powerlink was fitted to the converter, to “tell” the masterlink source, audio was started localy from the AAL side.

    which is only then cleared with a power cycle.

    This is less logical. Or maybe not: the converter was meant to be connected to a Video AAL or Audio AAL, but not both at the same time. Then without Y splitting adapter or similar in which scenario would the converter need to revert to video mode after have been triggered by Powerlink?