Reply To: beogram8000 won’t turn on

  • Topics Started 14
  • Total Posts 79

Hi John,

its been quite a while but from memory(?)  this was probably one I eventually shelved to be looked at again as other (easier) projects came in……

i know, that PCB is pretty terrible and not that flexible as it showed in various examples.

all those transistors I mentioned must have been tested off-board before but will be looked at again after I have taken out the board again plus without the Standby Dot present I would not expect to be able to turn on the Beogram anyhow.

will get back with further findings – thanks again for helping 👍