Reply To: Beocord 7000 voltage issues

#11389
alf
BRONZE Member
  • Topics Started 14
  • Total Posts 83

I am trying to follow the 12V entry for the drive, which I should measure at p16-4…..

but nothing anywhere near it.

I should also see 12V at the “emitter crosspoint” of TR37 and TR38…..nothing again.

both Transistors have been tested off-board as ok which made me believe I should actually see the 12VDC at that crossing or shouldn’t I ?!

i can see the entry voltages – 14.1V & 15.5V – at R171 and R172 …..so, what is it that I am missing here and why isn’t the capstan getting the 12V either.

the drive unit looks like being hard-wired to the control board #2.

ALF