Reply To: BEOVISION 7 NOT TURNING ON ?

#10373
Guy
Moderator
  • Warwickshire, UK
  • Topics Started 10
  • Total Posts 382

Firstly are you sure that the remote is working? View the end with a mobile phone camera (iPhone selfie camera works) and see if you can see the IR transmitters glowing.

Otherwise, perhaps the TV is in V.OPT 0, where it does not respond to IR commands. To resolve this:

With the TV at standby/off.

On the Beo4, press the POWER (Red Dot) button and LIST together. Then press LIST until OPTION is shown, press GO (centre button), and then press LIST to show V.OPT. Then press 1. The power light on the TV should blink to show that it has been accepted.

Now try the remote and see if the TV will respond