Reply To: beogram 5500 turntable repair, gear disassembly?

#10255
Mark-sf
BRONZE Member
  • Topics Started 0
  • Total Posts 122

It appears you are not getting DC voltage from the regulator on PC Bd #2. I would disconnect  connector P3 and measure the DC voltage on the input and output of the regulator, IC1. Either C3 or C4 could be a problem but id the fuse is not blowing, I would expect the regulator has opened. It’s not likely the solenoid unless you hear it activate when simply plugging in the power cord. Then either TR4 or 5 could be shorted.