Reply To: Beogram4000 behaving erratically

#10035
alf
BRONZE Member
  • Topics Started 14
  • Total Posts 81

Ok,

transistor 2TR6 has been relocated as recommended. Sorry, I would have posted a picture but I do not have the appropriate photo software compatible with this forum.

my ipad takes excellent photos but they are all too big for uploading.

The erratic issue seemed to have been related to the switch next to the solenoid.

as mentioned, the contact must have been insufficient between the pin and the leaf spring (closest to the spindle) so I adjusted the pin.

so far the Beogram hasn’t missed a beat and I begin to feel cautiously optimistic it may have fixed the erratic behaviour 👍🙏🏼

ALF