Sign in   |  Join   |  Help

Beosound 9000 mk2 problem. Advice or service needed

rated by 0 users
Not Answered This post has 0 verified answers | 3 Replies | 1 Follower

Yael Demedetskaya
Not Ranked
United States
5 Posts
OFFLINE
Bronze Member
Yael Demedetskaya posted on Sun, Dec 5 2021 12:39 AM

Hello everyone

 

I have a problem with cd and beosound 9000. Look at the video please

 

https://youtu.be/rlIbsw4-BhE

 

When I am trying to play cd it just restarts. And if before the try it was in standalone mode then after that restart it is again "tv opperated". Advuce needed. I am slightly familiar with electronics repair and can try to fix under a guidance or with advice or I need the service recommended in the New York state or neighborhood states. Thank you in advance

All Replies

Peter
Top 500 Contributor
Siemianowice Sl., Poland
111 Posts
OFFLINE
Bronze Member
Peter replied on Mon, Dec 6 2021 2:26 PM

Hi,

you should run testmodes 71 and 73 and see what informations you will get.

Generally laser lens may be dirty however it's strange because  there should be a "pause" message before switching off.

To clean laser lens please run testmode 65 then open the cover lid, take out the mains plug and take off the silver circle, silver cover and transparent semi circle. You will have the acces to the lens which may be cleaned with alcohol and wiped gently. To be sure please also wash at least one disk with detergent or liquid soap. Then, after assembly please run testmode 73 again.

Yael Demedetskaya
Not Ranked
United States
5 Posts
OFFLINE
Bronze Member

Thank you for your reply. I am sorry for the delay. I have tried to run those but it writes wrong sec. I made a video on that

 

https://youtube.com/shorts/cx7vLqzfcG0?feature=share

 

Thank you very much for help

 

Peter
Top 500 Contributor
Siemianowice Sl., Poland
111 Posts
OFFLINE
Bronze Member
Peter replied on Mon, Dec 20 2021 10:21 AM

Hi again,

this is a common mistake, when you enter to a test mode SHIFT 90258 you have then to chose the disk pushing a buton next to that disk and after that enter the mode numer 71 or 73 or any other. Please keep in mind that for test mode 71 the first disk position should be empty.

Page 1 of 1 (4 items) | RSS
Beoworld Security Certificate

SSL