Sign in   |  Join   |  Help

BV 6-22 med PS3?

rated by 0 users
Not Answered This post has 0 verified answers | 10 Replies | 1 Follower

Master_Geek
Not Ranked
79 Posts
OFFLINE
Bronze Member
Master_Geek posted on Thu, Jan 14 2021 10:10 AM

Er det muligt at tilslutte min Playsatation 3 til mit BV 6-22 med et DVI-HDMI kabel?

 

Jeg har forsøgt uden held. Nogen som ved hvad problemet kan være? 

All Replies

tb59427
Not Ranked
67 Posts
OFFLINE
Gold Member
tb59427 replied on Thu, Jan 14 2021 10:25 AM

Could be the resolution (try setting the PS3 to a smaller resolution) or HDCP maybe (a stupid system to block copying of content via HDMI). I managed to connect a raspberry pi4 via HDMI->DVI easily to the BV6. So in principle it works.

Master_Geek
Not Ranked
79 Posts
OFFLINE
Bronze Member

I have changed the resolution to 720p. Can the HDCP be turned off? 

Millemissen
Top 10 Contributor
Flensborg, Denmark
13,998 Posts
OFFLINE
Bronze Member

You could try a HDCP stripper like it is explained in this blog

https://www.jdhodges.com/blog/hdmi-hdcp-stripper/

MM

There is a tv - and there is a BV.

Guy
Top 50 Contributor
Buckinghamshire
2,285 Posts
OFFLINE
Gold Member
Guy replied on Thu, Jan 14 2021 11:45 AM

I use this one with Apple TV and it strips the hdcp for my BV6-23 and 6-26.  I have also used it with ps3 in the past: https://www.amazon.co.uk/gp/product/B00NAJ4UM2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Master_Geek
Not Ranked
79 Posts
OFFLINE
Bronze Member

If i use it with my desktop PC, would I be able to use its build in DVD-player for DVD movies? Or would I have the same problem with HDCP?

tb59427
Not Ranked
67 Posts
OFFLINE
Gold Member
tb59427 replied on Thu, Jan 14 2021 12:24 PM

You probably need to check this - I can never seem to find a logic. My MacMini (running Kodi) runs well on the DVI port. The ATV doesn't - throws an error that the receiving end doesn't support HDCP. A raspberry PI running Kodi again works very well including Netflix, Amazon Prime etc. So - you need to check it, I'm afraid.

tb59427
Not Ranked
67 Posts
OFFLINE
Gold Member
tb59427 replied on Thu, Jan 14 2021 12:40 PM

Guy,

can you control the ATV via PUC, when you have DVI activated? My BV6-26 doesn't seem to be able to do that.

regards

-tb

Guy
Top 50 Contributor
Buckinghamshire
2,285 Posts
OFFLINE
Gold Member
Guy replied on Thu, Jan 14 2021 12:45 PM

Sadly no - you need a much newer 6-26 to be able to do that!

If your siri remote is the older ATV4 type (which does not have a while circle) then you can use that to control the TV's volume though!

tb59427
Not Ranked
67 Posts
OFFLINE
Gold Member
tb59427 replied on Thu, Jan 14 2021 12:49 PM

...and I assume an SW update to get there is impossible (or doesn't fit the residual value of a BV6)....

Guy
Top 50 Contributor
Buckinghamshire
2,285 Posts
OFFLINE
Gold Member
Guy replied on Thu, Jan 14 2021 2:16 PM

Actually having said that my BC6-26 (type 9282) does allow the DVI to be used as a controllable STB input.  I don't use it in this manner because there is an annoying fault with the DVI input where it 'blinks' every few minutes - I think it's some sort of DVI timing handshake issue.

Page 1 of 1 (11 items) | RSS
Beoworld Security Certificate

SSL