Sign in   |  Join   |  Help

BeoMaster 3500: touch panel malfunction

rated by 0 users
Not Answered This post has 0 verified answers | 3 Replies | 1 Follower

KolfMAKER
Not Ranked
70 Posts
OFFLINE
Bronze Member
KolfMAKER posted on Thu, Oct 8 2020 7:46 PM

I have a BeoMaster 3500 on which the last 4 touch buttons on the right don’t work.
I checked them also by detaching the glass, and touching the rubber tips.
All buttons work, except the last 4 on the right.

Any suggestion is welcome.

All Replies

techhn
Not Ranked
32 Posts
OFFLINE
Gold Member
techhn replied on Fri, Oct 9 2020 11:19 AM

Hi.

Contact "Dillen".

Dillen
Top 10 Contributor
Copenhagen / Denmark
12,044 Posts
ONLINE
Founder
Moderator
Dillen replied on Sun, Oct 11 2020 7:12 AM

The four rightmost touchpads (7,8,9,st.by) are in the same group = sounds like a strobe problem.
Check TR1, TR2, TR3, TR4 and IC1.

Martin

KolfMAKER
Not Ranked
70 Posts
OFFLINE
Bronze Member

Thanks Martin!

I have been able to get a defect BM3500 unit, but with working touch panel PCB, including all the 4 pieces of plastic brackets.
So I have a working unit now, perfect! 

To finish this repair, I need to put in new double sided tape. I have two questions about that:

  1. I believe the double sided tape has to be put both on the plastic brackets, as well as on the under side of the glass panel. Is that correct?
  2. I can image that the type of tape matters (stickiness, thickness, etc.). Which tape should I use?

 

Page 1 of 1 (4 items) | RSS
Beoworld Security Certificate

SSL