Sign in   |  Join   |  Help

Beosystem3 CTRL/IR out 3V or 5V?

rated by 0 users
Not Answered This post has 0 verified answers | 1 Reply | 1 Follower

Not Ranked
25 Posts
Bronze Member
thunder posted on Wed, May 13 2020 5:13 AM

I'm trying to integrate my raspberry pi setup into the BS3 setup I have here. 

The BS3 has an 3.5mm IR blaster output. But does the BS3 drive it with 3V or 5V pulses?

If 3V I can directly attach it to GPIO pins on the pi, if not I'll have to step down the voltage or go blaster/IR receiver->PI.



All Replies

Top 50 Contributor
1,902 Posts
Gold Member
Guy replied on Wed, May 13 2020 9:38 AM

Have a look at RaMaBo's 18 Jul post in this thread:

I would expect his advice to apply to the BS3 also.

Page 1 of 1 (2 items) | RSS
Beoworld Security Certificate