Sign in   |  Join   |  Help

Beimaster 5000 volume issue

rated by 0 users
Not Answered This post has 0 verified answers | 5 Replies | 1 Follower

Deek66
Not Ranked
7 Posts
OFFLINE
Bronze Member
Deek66 posted on Tue, Jan 14 2020 1:56 PM

Just bought a set up and while the radio plays loud enough to awaken the dead, the attached record player has a pretty low volume even when cranked up to 6. The cassette deck and cd deck do not work at the moment, so not connected. 
many obvious thing I can try to sort this?
thanks in advance.  

All Replies

GaSelle
Not Ranked
9 Posts
OFFLINE
Bronze Member

Check the DIN plug. The mounting angle causes the wires to break.

Deek66
Not Ranked
7 Posts
OFFLINE
Bronze Member
Deek66 replied on Tue, Jan 14 2020 4:56 PM

Anyone able to point me in direction of wiring diagram. Wires broken. Not sure where they re solder. TIA

Dillen
Top 10 Contributor
Copenhagen / Denmark
11,178 Posts
OFFLINE
Founder
Moderator
Dillen replied on Tue, Jan 14 2020 5:17 PM

Which Beogram are you using?
Is it connected to the PHONO input (the position of the sockets compared to the related lettering confuses many).

Martin

Deek66
Not Ranked
7 Posts
OFFLINE
Bronze Member
Deek66 replied on Tue, Jan 14 2020 5:21 PM

Beogram 5005 type 5921. I have the DIN apart and ready to resolder. By the time I had it apart only red wire and ground were still attached, so now stuck as I don’t know where rest of wires should go. 

Deek66
Not Ranked
7 Posts
OFFLINE
Bronze Member
Deek66 replied on Tue, Jan 14 2020 5:23 PM

Beogram 5005 type 5921. I have DIN apart ready to re solder. Only ground and red were still attached by time I wrestled it apart, so now stuck not knowing where rest of wires go. 

Page 1 of 1 (6 items) | RSS
Beoworld Security Certificate

SSL