Sign in   |  Join   |  Help

Turn on the Beovision with a network command

rated by 0 users
Not Answered This post has 0 verified answers | 6 Replies | 1 Follower

doun
Not Ranked
25 Posts
OFFLINE
Bronze Member
doun posted on Wed, May 22 2019 11:29 AM

Hello,

 

I try to turn on the Beovision 11 through the network with a put request and json format. I am able to put it into standby mode but I don't know the command to turn it on.

Please find the command to turn it off : self._postReq('PUT','BeoDevice/powerManagement/standby', {"standby":{"powerState":"standby"}})

But I don't know the command to turn it on. Do I need to activate a source?

Can someone help me to find the solution?

All Replies

ngnear
Top 500 Contributor
124 Posts
OFFLINE
Bronze Member
ngnear replied on Wed, May 22 2019 3:49 PM
This may be useful

https://github.com/PolyPv/BeoRemote/blob/master/BeoRemote.txt

Tim
Opman
Top 150 Contributor
Wilmslow, Cheshire
430 Posts
OFFLINE
Bronze Member
Opman replied on Wed, May 22 2019 9:38 PM

In Network settings of the TV you need to switch on WAKE ON LAN to be able to switch TV on via network.

Aussie Michael
Top 50 Contributor
Melbourne, AU
3,270 Posts
OFFLINE
Bronze Member

Interestingly if you have a BV14 - there is no Wake on LAN command, only a Wake on WLAN

But as you have a BV11 i'd agree (just letting you know incase you change your TV) 

doun
Not Ranked
25 Posts
OFFLINE
Bronze Member
doun replied on Thu, May 23 2019 7:32 AM

Thanks for your answer. This option is already set on my TV. I tried to set a new source via the network (as I did with the remote control)to wake up the TV but it didn't work. I think there is another command but I did not find it...

PaulGiles
Top 500 Contributor
72 Posts
OFFLINE
Bronze Member
Could not get my BV11 to wake on LAN, wired or wireless.

Integrated core and it comes on as soon as you connect to the core.
doun
Not Ranked
25 Posts
OFFLINE
Bronze Member
doun replied on Mon, May 27 2019 6:26 AM

I found the solution. You need to send a magic number to wake up the BV11 and then you can send another command.

send_magic_packet(MAC,ip_address='192.168.0.255',port=9) where MAC is  the MAC address of the TV.

Best regards and thanks for your help.

Page 1 of 1 (7 items) | RSS
Beoworld Security Certificate

SSL