Sign in   |  Join   |  Help

My dealer showed me how to mount an ATV4/4K inside a BV11

rated by 0 users
This post has 21 Replies | 2 Followers

Dyssegaard
Top 500 Contributor
Copenhagen, Denmark
Posts 187
OFFLINE
Bronze Member
Reply
Dyssegaard Posted: Wed, May 15 2019 3:49 PM
For some time I’ve had an ATV3 mounted inside my BV11 (my wife doesn’t like external boxes).

I would like to have an ATV4K instead, but there wasn’t enough space for it (it’s 12 mm thicker than the ATV3), so I asked my local B&O dealer what to do. He showed me, that the BV11 was actually preparred for it, but it required that a small piece of the inside cabinet was removed.

Before removal:

After removal:

This piece was removed:

And now the ATV4K fits nicely:

PS: The PUC table for the ATV4K is great. It has direct access to Home screen and Airplay speakers Big Smile

Best regards - Dyssegaard

Living room: Beovision Eclipse 55, Beolab 3 / R1 (back), Beolab 2 / R1 (sub), AppleTV 4K, Bedroom: Beovision 11-40, AppleTV 4. Home office: Beolit 12, Kitchen: Beoplay M5. Travel: Beoplay H8, Beoplay A1. NAS: WD My Cloud Home / Plex DLNA Server.

seethroughyou
Top 150 Contributor
UK
Posts 759
OFFLINE
Bronze Member
Reply
seethroughyou replied on Wed, May 15 2019 7:17 PM
I agree with your wife that external boxes are ghastly. Good job. Thank you for sharing. I’ve wanted a Bv11 for years but my wife has gone the Costco route sadly. The ability to hide boxes away is a strength with this TV.
Hiort
Top 50 Contributor
Sweden
Posts 2,459
OFFLINE
Bronze Member
Reply
Hiort replied on Thu, May 16 2019 8:53 AM

Nice tip!

Is that a 46" or 55" you have there?

Does it matter for the space available?

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Library: A6, Beocom 6000 Bedroom: M5 Office: Beocom 2 Travel: Beoplay E8 2.0, Beoplay P2

Dyssegaard
Top 500 Contributor
Copenhagen, Denmark
Posts 187
OFFLINE
Bronze Member
Reply
Dyssegaard replied on Thu, May 16 2019 11:13 AM
Hiort:

Nice tip!

Is that a 46" or 55" you have there?

Does it matter for the space available?

Livingroom: BL3, BL11, BV11-46 Kitchen : Beosound 1 GVA, Beocom 2 Bathroom : M3 Library : A6, Beocom 6000 Bedroom : M5 Office : Beocom 2 Travel : Beoplay E8 2.0, Beoplay P2

It’s a 40” so I guess that there won’t be less space in the bigger models.

The ATV4/4K has a depth of 35 mm, so it should be easy to verify in advance if it will work.

Best regards - Dyssegaard

Living room: Beovision Eclipse 55, Beolab 3 / R1 (back), Beolab 2 / R1 (sub), AppleTV 4K, Bedroom: Beovision 11-40, AppleTV 4. Home office: Beolit 12, Kitchen: Beoplay M5. Travel: Beoplay H8, Beoplay A1. NAS: WD My Cloud Home / Plex DLNA Server.

Hiort
Top 50 Contributor
Sweden
Posts 2,459
OFFLINE
Bronze Member
Reply
Hiort replied on Thu, May 16 2019 3:31 PM
Got inspired and did the same on my BV11-46.

Worked very well:

Now the cabinet under the TV is empty Smile

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Library: A6, Beocom 6000 Bedroom: M5 Office: Beocom 2 Travel: Beoplay E8 2.0, Beoplay P2

hostler
Not Ranked
Posts 47
OFFLINE
Bronze Member
Reply
hostler replied on Thu, May 16 2019 4:16 PM

You win at living rooms Smile

Hiort
Top 50 Contributor
Sweden
Posts 2,459
OFFLINE
Bronze Member
Reply
Hiort replied on Thu, May 16 2019 4:51 PM
hostler:

You win at living rooms

Thanks Smile

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Library: A6, Beocom 6000 Bedroom: M5 Office: Beocom 2 Travel: Beoplay E8 2.0, Beoplay P2

Dyssegaard
Top 500 Contributor
Copenhagen, Denmark
Posts 187
OFFLINE
Bronze Member
Reply
Dyssegaard replied on Thu, May 16 2019 5:15 PM
Hiort:

Got inspired and did the same on my BV11-46.

Worked very well:

Now the cabinet under the TV is empty

Livingroom: BL3, BL11, BV11-46 Kitchen : Beosound 1 GVA, Beocom 2 Bathroom : M3 Library : A6, Beocom 6000 Bedroom : M5 Office : Beocom 2 Travel : Beoplay E8 2.0, Beoplay P2

Very nice Big Smile

PS: My answer rgd. size (my BV11 is 40 inch) seems to have been blocked by the moderator. I don’t know whySad.

Best regards - Dyssegaard

Living room: Beovision Eclipse 55, Beolab 3 / R1 (back), Beolab 2 / R1 (sub), AppleTV 4K, Bedroom: Beovision 11-40, AppleTV 4. Home office: Beolit 12, Kitchen: Beoplay M5. Travel: Beoplay H8, Beoplay A1. NAS: WD My Cloud Home / Plex DLNA Server.

Reto
Not Ranked
Zurich
Posts 43
OFFLINE
Bronze Member
Reply
Reto replied on Sun, Sep 8 2019 1:08 PM

Cool!

What is the piece made of? Plastic?; Hence you can easely take it off?

 

Hiort
Top 50 Contributor
Sweden
Posts 2,459
OFFLINE
Bronze Member
Reply
Hiort replied on Sun, Sep 8 2019 3:05 PM
Reto:

Cool!

What is the piece made of? Plastic?; Hence you can easely take it off?

Yep, plastic

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Library: A6, Beocom 6000 Bedroom: M5 Office: Beocom 2 Travel: Beoplay E8 2.0, Beoplay P2

Aussie Michael
Top 50 Contributor
Melbourne, AU
Posts 3,427
OFFLINE
Bronze Member
Reply
Aussie Michael replied on Mon, Sep 9 2019 6:50 AM
I find that the ATV4K runs hotter than previous gen (fans etc)

Would it pay to turn the ATV 4K around so the bottom (fans) face outward ?

Even though the BV11 can’t handle 4K did you install the 4K version because it’s a quicker device ?
Hiort
Top 50 Contributor
Sweden
Posts 2,459
OFFLINE
Bronze Member
Reply
Hiort replied on Mon, Sep 9 2019 12:54 PM
Aussie Michael:

Even though the BV11 can’t handle 4K did you install the 4K version because it’s a quicker device ?

My install was the “non 4K” version. The 4K have small slots in the bottom to ventilate the casing. If installed like this it’s recommended to mount the ATV 4K so that it can ventilate.

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Library: A6, Beocom 6000 Bedroom: M5 Office: Beocom 2 Travel: Beoplay E8 2.0, Beoplay P2

Dyssegaard
Top 500 Contributor
Copenhagen, Denmark
Posts 187
OFFLINE
Bronze Member
Reply
Dyssegaard replied on Mon, Sep 9 2019 6:15 PM
Aussie Michael:

I find that the ATV4K runs hotter than previous gen (fans etc)

Would it pay to turn the ATV 4K around so the bottom (fans) face outward ?

Even though the BV11 can’t handle 4K did you install the 4K version because it’s a quicker device ?

I had to refit the PUC cable because the ir-sensor location of the ATV 4K was different from the ATV 3 previously installed. At the same time I turned the ATV 4K so the fans are now facing outward. Everything works perfect now.

My dealer recommended the 4K version due to the better performance for a very small additional price compared to the HD version.

Best regards - Dyssegaard

Living room: Beovision Eclipse 55, Beolab 3 / R1 (back), Beolab 2 / R1 (sub), AppleTV 4K, Bedroom: Beovision 11-40, AppleTV 4. Home office: Beolit 12, Kitchen: Beoplay M5. Travel: Beoplay H8, Beoplay A1. NAS: WD My Cloud Home / Plex DLNA Server.

Aussie Michael
Top 50 Contributor
Melbourne, AU
Posts 3,427
OFFLINE
Bronze Member
Reply
Aussie Michael replied on Tue, Sep 10 2019 6:57 AM
Great news

I also found that the puc cable is mounted on the left side of the ATV4K

Ever since I changed that I was happy to works well.

The ATV4K still doesn’t turn off though when I turn off my BV14
kuyttendaele
Top 150 Contributor
Posts 550
ONLINE
Founder
Reply
kuyttendaele replied on Wed, Sep 11 2019 8:23 AM

Aussie Michael:
Great news

The ATV4K still doesn’t turn off though when I turn off my BV14

Same thing in my BeoVision 14-40. A bug in the PUC-table I guess.

Karel.

 

Aussie Michael
Top 50 Contributor
Melbourne, AU
Posts 3,427
OFFLINE
Bronze Member
Reply
Aussie Michael replied on Thu, Sep 12 2019 9:02 AM
kuyttendaele:

Same thing in my BeoVision 14-40. A bug in the PUC-table I guess.

Karel.

What I worked out today is that there was under PUC management that there was an update the the ATV4 PUC

So I updated it.

I will see if that fixes.

As a workaround you can press LIsT and power and it shuts off. Not sure if I tried that before the update or not.

Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 13,040
OFFLINE
Bronze Member
Reply
Millemissen replied on Thu, Sep 12 2019 9:38 AM
atv-puc - small.jpg

 

Always use the right PUC

MM


There is a tv - and there is a BV.

Aussie Michael
Top 50 Contributor
Melbourne, AU
Posts 3,427
OFFLINE
Bronze Member
Reply
Aussie Michael replied on Thu, Sep 12 2019 9:41 AM
Millemissen:

Always use the right PUC

MM

There is a tv - and there is a BV.

We are assuming the ATV4K is the 4th gen
Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 13,040
OFFLINE
Bronze Member
Reply
Millemissen replied on Thu, Sep 12 2019 10:43 AM

Sure!

MM

There is a tv - and there is a BV.

kuyttendaele
Top 150 Contributor
Posts 550
ONLINE
Founder
Reply
kuyttendaele replied on Thu, Sep 12 2019 10:49 AM

I'll update my PUC tonight... But I'm also running the beta of tvOS... so probably 2 issues at once... tvOS should probably be out of beta beginning October (or at the latest 1Nov when AppleTV+ launches)

Karel.

OlivierC
Not Ranked
Posts 55
OFFLINE
Bronze Member
Reply
OlivierC replied on Fri, Sep 13 2019 7:11 PM
Same issue here with BeoPlay V1 and ATV3: PUC is the correct one and it seems to be updated but it is not switching off.

Olivier
Aussie Michael
Top 50 Contributor
Melbourne, AU
Posts 3,427
OFFLINE
Bronze Member
Reply
Aussie Michael replied on Sat, Sep 14 2019 5:53 AM

It seems the update didn't fix the issue of the power for me.

I even re set up the HDMI from scratch but no beuno 

 

 

 

Page 1 of 1 (22 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly
Beoworld Security Certificate

SSL