Sign in   |  Join   |  Help

Control of V1 using NL/ML converter over ir

rated by 0 users
Answered (Not Verified) This post has 0 verified answers | 2 Replies | 0 Followers

badgersurf
Top 150 Contributor
527 Posts
OFFLINE
Gold Member
badgersurf posted on Thu, Apr 18 2019 7:18 PM

Hi all,

my V1 has developed a fault with it not responding to IR commands, it can be controlled via the app, so looking at old threads guess this is the same problem a lot of people have had which cost £700 to fix.

my question is if I connect a ML/NL converter with an ir would i be able to control the TVs through ir using my  Beo4? I do have a BLGW as well.

unfortuntly I can get to the set to try this at the moment.

hope someone has any idea?

Thanks

Toby

All Replies

beojeff
Top 75 Contributor
USA
1,453 Posts
OFFLINE
Silver Member
Answered (Not Verified) beojeff replied on Thu, Apr 18 2019 10:34 PM
Suggested by beojeff

I don't believe that you can. I tried doing this with my BeoVision 10 -- since the IR receiver is so low on the BV10 that I wanted an IR receiver more accessible from my bed. It didn't work. However, you CAN send LIGHT/CONTROL commands.

badgersurf
Top 150 Contributor
527 Posts
OFFLINE
Gold Member

Hi Jeff,

Thanks for getting back to me (thought I had responded earlier).

I tried playing with the converter and the V1 andI can not get it to send TV commands via the converter.

I had found a work around this and that was to buy a BV11!

Thanks

Toby

Page 1 of 1 (3 items) | RSS
Beoworld Security Certificate

SSL